DE-960 User Manual DUALi Inc. Document Version: 1.00 Last Revised Date: 16th. DEC 2011 Copyright ⓒ 2016 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products.
DE-960 User’s Manual Revision History 2016.12.16 (Ver. 1.00) : First Release © Copyright 2000-2016 DUALi Inc. Version : 1.00 3 DUALi Inc. (http://www.duali.
DE-960 User’s Manual CONTENTS 1 Introduction ....................................................................................................................................... 5 2 Contents Confirmation...................................................................................................................... 5 3 Hardware Specification ..................................................................................................................... 5 4 Installation .................
DE-960 User’s Manual 1 Introduction DE-960 is refined design of proximity reader which supports contactless (ISO14443 A). It supports 32/34/64/66-bit Wiegand format with a host communication which is the most widespread system. It’s applicable to various system such as access control, time attendance, parking management or e-ID system. 2 - Contents Confirmation The following items are contained in DE-960 package.
DE-960 User’s Manual 1. Place the wall mount bracket on the wall and fix it tightly with screw (Φ4mm Flat head) – 4nos 2. Connect the power and communication cable to DE-960’s terminal block. (Refer to chapter 5, Connection diagram) 3. Tilt the device slightly and insert to the wall mount from the top. Fix it tightly with 3*4 flat head machine screw. Φ4mm Flat head screw 3*4 Flat head machine
DE-960 User’s Manual 5 Connection diagram Depending on cable connection, you can make choice among RS-485 / RS-232 / Wiegand. Please refer to the below diagram for the connection. PIN NAME COLOR PIN NUMBER PWR_IN RED 1 PWR_GND BLACK 2 RS232_RX GRAY 3 RS232_TX JADE 4 WGD_D0 GREEN 5 WGD_D1 WHITE 6 PWR_GND BLUE 7 LED BROWN 8 BEEP YELLOW 9 TAMPER VIOLET 10 RS485+ ORANGE 11 RS485- SKY BLUE 12 No.1 PIN Version : 1.00 No.12 PIN 7 DUALi Inc. (http://www.duali.
DE-960 User’s Manual 6 Operation & Usage 1. Once input power to device, white LED on KEY pad is turned on and off, after that, BLUE & RED LED are turned on. 2. When user present authorized contactless card to the reader, the reader makes 1 time beep sound and 2 times of turning RED LED. It sends card’s data to access controller through Wiegand data line. 3. When an unauthorized card is presented on the reader, RED LED will be blinking. 4. Tamper (TAMP) : Reader makes alarm when its CASE is forced to open.
DE-960 User’s Manual 6. Buzzer Control : Reader makes beep sound when BEEP Signal(BROWN) with 0V. 5V BUZZER OFF BUZZER ON BUZZER OFF GND Version : 1.00 9 DUALi Inc. (http://www.duali.
DE-960 User’s Manual 7 Output format 7-1. Data format - Data format can be decided by setting.
DE-960 User’s Manual 8 Wiegand output timing and level 5.00V 132uS 2.14mS Version : 1.00 11 DUALi Inc. (http://www.duali.
DE-960 User’s Manual 9 Function configuration (Communication setting) 9.1 Wiegand option set Following is the communication frame for wiegand option setting. Since it is saved in flash memory after the first setting, the reader does not need to be set again.
DE-960 User’s Manual 9.3 Automatic Card Detection Disable Following is the communication frame for automatic card detection disable setting This command controls the automatic card detection function. It is used when controlling DE-960 from host device like PC. (9600bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD LRC 0x02 0x00 0x01 0xEF 0xEE 9.4 KEY Mode option set Following is the communication frame for Key mode setting.
DE-960 User’s Manual 9.6 KEY Timeout option set Following is the communication frame for key time out option setting. Since it is saved in flash memory after the first setting, the reader does not need to be set again. (9600bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD 0x02 0x00 0x02 0xE3 DATA 0x03 LRC LENL ^ CMD ^ DATA[0] DATA[1] ( ^ : exclusive oring) DATA[1] State Description 0x01~0x0A Touch Key Timeout Touch Key timeout setting (Range: 0x01~0x0A) 9.
DE-960 User’s Manual 9.9 RF Scan option set Following is the communication frame for RF Scan setting. Since it is saved in flash memory after the first setting, the reader does not need to be set again (9600bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD 0x02 0x00 0x02 0xE3 DATA 0x06 LRC LENL ^ CMD ^ DATA[0] DATA[1] ( ^ : exclusive oring) DATA[1] Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 ~ Bit0 Version : 1.
DE-960 User’s Manual 10 Funtion configuration (KEY setting) 10.1 Enter setting mode - Through DE-960 Touch KEY, it is possible to enter setting mode. - How to enter setting mode 1. When press “*” “*” (two times), buzzer sound and it enter “password input mode” 2. Input password (Max. 8 digit) 3. After input, press “#” then RED/BLUE LED will be blinking and finally enter setting mode.. 4. Input your password to change. 5. Press “*” to finish. 6.
DE-960 User’s Manual 10.3 Default LED setting - When RED/BLUE RED keep blinking, press “2” to enter default LED setting menu. - After entering, press option number below. KEY State Description 1 Default LED RED Default LED RED 2 Default LED BLUE Default LED BLUE - After press option number and press “#” to save option to flash memory. Then DE-960 will reboot. - Press“*” to return to setting menu. - If press the number except 1~2, it will set to No.1(Defualt LED RED) 10.
DE-960 User’s Manual 10.5 Wiegand Length setting - When RED/BLUE RED keep blinking, press “4” to enter Wiegand setting menu. - After entering, press option number below. KEY State Description 1 Wiegand 32Bit Card Wiegand Data 32bit 2 Wiegand 34Bit Card Wiegand Data 34bit 3 Wiegand 64Bit Card Wiegand Data 64bit 4 Wiegand 66Bit Card Wiegand Data 66bit - After press option number and press “#” to save option to flash memory. Then DE-960 will reboot. - Press“*” to return to setting menu.
DE-960 User’s Manual 11 Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, Dragon BT, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component against the provided manual.
12 Certifications FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
DE-960 User’s Manual *Please contact our service team for the technical/ sales supports. DUALi Inc. 1-309 Innoplex, 552 Wonchoen-dong, Youngtong-gu, Suwon, Gyeonggi-do, Korea (zip: 443-380) Tel : +82 31-213-0074 Fax : +82 31-213-0078 E-mail : lab@duali.com Web-site : http://www.duali.com Version : 1.00 20 DUALi Inc. (http://www.duali.