DE-930 User’s Manual DUALi Inc. Document Version: 1.0 Last Revised Date: Aug. 2011 Copyright ⓒ 2011 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products.
DE-930 User’s Manual Revision History 2011.08 (Ver. 1.0) : First Release © Copyright 2000-2011 DUALi Inc. Version : 1.0 3 DUALi Inc. (http://www.duali.
DE-930 User’s Manual CONTENTS 1. Introduction .................................................................................................................................... 5 2. Contents Confirmation ................................................................................................................... 5 3. Hardware Specifications................................................................................................................. 5 4. Installation .......................
DE-930 User’s Manual 1. Introduction DE-930 is refined design of proximity reader which supports Contactless ( ISO 14443 A/B type, Mifare®, FeliCa™ ) and SAM. It also supports 32/34 / 64/66-bit Wiegand format for Host communication which is the most widespread system. DE-930 is applicable to various systems as Access control system, Time attendance system, Parking management or e-Payment system. 2. Contents Confirmation - The following items are contained in DE-930 package.
DE-930 User’s Manual 4. Installation 1. Place the wall mount bracket on the wall and fix it tightly with Screw (Φ4mm Flat head) -4nos. 2. Connect the power and communication cable to DE-930’s Terminal Block. (refer to the picture as below) 3. Tilt the device slightly and insert to the wall mount from the top. Fix it tightly with 3*4 Flat head machine screw. Φ4mm Flat head screw 3*4 Flat head machine
DE-930 User’s Manual 5. Connection Diagram Terminal block can be differ by choosing option (RS485 OR Wiegand ). See the table as below Pin No. Name Description 1 PWR POWER 2 485G POWER 3 485- Comm. 4 485+ Comm. 5 GND POWER 6 TAMP Output 7 BEEP Input 8 LED Input 9 WD1 Comm.(Output) 10 WD0 Comm.(Output) 11 GND POWER 12 PWR POWER Terminal Block Option RS485 Comm. option Wiegand Comm. option * RS232 1 Pin No.
DE-930 User’s Manual 6. Operation & Usage 1. Apply power of the Reader, then check 5 times of Beep sound and RED LED is on. It means this device is ready. 2. Present an authorized contactless card to the reader until you hear 1 time of Beep sound and see Blue LED is blinking. The reader sends Card’s data to Access controller through the Wiegand data line. 3. When User present unauthorized card to the reader, its Red LED will be blinking. The reader will also make 1 time of short Beep sound. 4.
DE-930 User’s Manual 7. Output Format 7-1. Wiegand output format 1. Data format - Data format can be decided by setting(Function Configuration).
DE-930 User’s Manual 2. Timing diagram 8. Function Configuration If User send the setting via RS232 , reader (DE-930) working pattern changes. Following is the communication frame for setting. It will be saved at flash memory. You don’t need setting after first setting. (9600bps, 8 data, no parity, 1 stop bit) STX LENH LENL CMD DATA LRC 0x02 0x00 0x02 0xE0 DATA[0] LRC DATA[0] State Description Bit7~4 RFU RFU 0 4byte ID(32 or 34bit) depend on parity setting(No.
DE-930 User’s Manual 9. Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-930, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component.
DE-930 User’s Manual NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.