BTM60 INSTALLATION Typical Installation Ste i SHE ESTERS Installation Quick Reference * Insert the mounting clip into the guide holes, and attach to the BTMé0 module as seen in the picture above. * Mount the BTMé0 onto the visor using the using the mounting clip, ensuring the microphone is facing the driver. Refer fo the picture below for reference. » Carefully route the connection cable down the A-pillar of the vehicle, then to the back of your Dual Bluetooth® ready head unit.
BTM&0 OPERATION Quick Start Guide Note: You must firs! pair and connect your Bluetooth® motile device lo the BTMé0 to place and receive calls. Refer to your head unit owner's manual for pairing and detailed operation instructions. Receiving a Call * When the BTM&0 detects an incoming call, your head unit will automatically switch to Bluetooth mode. and display the caller ID phone number. * To receive an incoming call, press T) on the BTM&0 or your head unit when the phone is ringing. * During a phone call.
[I BTM60 WARRANTY Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state lo state. Dual Electronics Corp. warrants this product io the original purchaser to be free from defects in material and workmanship for & period of one year from the date of the original purchase. Dual Electronics Corp. agrees. at our option. during the warranty period. lo repair any defect in material or workmanship or to furnish an gal new; renewed.