Specification Sheet

DteeDck USB Type-C to VGA Adapter
Specification:
General
 USB Type-C Specification 1.1
 VESA DisplayPort (DP) v1.4 compliant receiver
 VGA output interface, DAC speed up to 210-MHz, 8-bit
 Support all USB Type-C Channel Configuration (CC)
 Embedded oscillator and there's no need for the external crystal
 Embedded linear dropout regulator (LDO)
 Embedded MCU and SPI flash
 Embedded EDID (RTD2 169U will response EDID if terminal device doesn't
have it)
 Embedded V-sync/ H-sync 5V buffer
 Max audio sample rate of 192KHz x8 channels
 Programmable internal low-voltage-reset (LVR)
 Support full link training and no link training
 AUX CH, I2C host interface for chip control
USB Type-C DisplayPort(DP) Alt Mode Input (receiver)
 USB Type-C Specification 1.1 and backward compatible with Type-C Specification
1.0 VESA DisplayPort v1.4 compliant. Support 2-lane HBR2 (5.4-Gbps)
input. Built-in high performance adaptive equalizer. Support 1-MHz AUX channel
 USB Type-C Channel Configuration (CC) function
 Support Hot Plug Detect (HPD)
VGA Output Interface
 Triple 8-bit DAC (Digital-to-Analog Converter) with clock up to 210-MHz
 Support up to 1920x1200x60, 1920x1440@60hz (reduced blanking),
2048x1152@60hz(reduced blanking), and 2048x1536@60hz (reduced blanking)
 Embedded V-sync/ H-sync 5V buffer
 HBM 8-KV for VGA connector pins VESA VSIS v1r2 compliant