User's Manual

ManualsBrandsDT Research ManualsComputers & AccessoriesMobile Tablet

DT39

5CR

BASIC OPERATION GUIDE

GLISH

INTRODUCTION

Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT395CR.

Featuring a slim yet robust enclosure, the two-pound DT395CR with 8.9”TFT display is powered by

the Intel® Atom™ quad core processor, offering optimal combinations of performance and power

savings.

The DT395CR is available with Windows® operating system. Each software operating system

features web browser, client/server computing software, media player, accessories, and

applications support.

ACKAGE CONTENTS

• DT395CR with Internal Battery Pack, Stylus and Bumpers

• AC-DC Power Adapter with Power Cord

• Handstrap

•Basic Operation Guide

Summary of content (10 pages)

PAGE 1
DT395CR BASIC OPERATION GUIDE ENGLISH INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT395CR. Featuring a slim yet robust enclosure, the two-pound DT395CR with 8.9”TFT display is powered by the Intel® Atom™ quad core processor, offering optimal combinations of performance and power savings. The DT395CR is available with Windows® operating system.
PAGE 2
DT395CR DT395CR: ENGLISH 2
PAGE 3
Input/ Output Ports A Barcode Scanner (optional) B Headphone Jack C USB Port D DC Power Input E Camera (optional) F LAN and HDMI-in (optional) G LAN and 6-pin lockable connector for EIA/RS-232/422/485 (adapter cable required) (optional) Button Functions BUTTON ACTION 1 Programmable button without the scanner module As scanner trigger when equipped with the scanner module 2 Power on.
PAGE 4
DT395CR OPERATION Internal Battery Warning! ! The Internal battery pack should only be replaced by an authorized DT Research service representative. Please contact your product and/or service provider for internal battery replacement service. Powering ON and OFF To activate the DT395CR, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT395CR in Standby mode, push and quickly release the Power Button.
PAGE 5
Start Up If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established. Configuring the DT395CR The tablet may be configured using the utilities and methods dictated by the software operating system. The DT395CR should be configurable for various properties such as user profiles, network features, and several system elements.
PAGE 6
DT395CR Battery LED Status: • • Orange indicates that the battery is charging When the AC/DC adapter is plugged into the tablet, the Battery LED light will be off when fully charged Display Mode LED: When the tablet is in default OS mode, the Display Mode LED will be blue. When in HDMI mode, the light will be orange. Precautions • • Always exercise care when operating and handling the DT395CR. Do NOT apply excessive pressure to the display screen.
PAGE 7
USING THE DT395CR Remote Management Depending on software configuration, the DT395CR can be centrally managed for asset monitoring and for software control. Please consult your device provider. To Hold the Tablet Left hand: grip the left back side of the tablet with your left hand four index fingers, with thumb resting on the top of the back side of the tablet and palm securely against the back.
PAGE 8
DT395CR Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 9
DT395CR Specifications: System CPU Intel® Atom™ Quad Core, 1.44GHz RAM 4GB Storage Operating System Display 64GB flash Microsoft® Windows® 10 IoT Enterprise 8.9” LED-backlight screen with capacitive touch; anti-reflection outdoor viewable Display Resolution Network Interface Control Switch and Buttons Indicator 1920 x 1200 Wi-Fi 802.11ac; Bluetooth 4.
PAGE 10
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.