User's Manual

ManualsBrandsDT Research ManualsComputers & AccessoriesMobile Tablet





DT395BV

BASICOPERATIONGUIDE





ENGLISH



INTRODUCTION

ThankyouforacquiringthelatestadditiontoDTResearch’slineofmobiletablets—theDT395BV.

Featuringan,slimyetrobustenclosure,thetwo‐poundDT395BVwith9"TFTdisplayispowered

bytheIntel®Celeron®dualcoreprocessor,offeringoptimalcombinationsofperformanceand

powersavings.

TheDT395BVisavailablewithWindows®orAndroidoperatingsystem.Eachsoftwareoperating

systemfeatureswebbrowser,client/servercomputingsoftware,mediaplayer,accessories,and

applicationssupport.



PACKAGECONTENTS

•DT395BVwithInternalBatteryPack,StylusandBumpers

•AC‐DCPowerAdapterwithPowerCord

•Handstrap

•BasicOperationGuide



 

DT395BV

Summary of content (9 pages)

PAGE 1
DT395BV BASIC OPERATION GUIDE ENGLISH INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT395BV. Featuring an, slim yet robust enclosure, the two‐pound DT395BV with 9" TFT display is powered by the Intel® Celeron® dual core processor, offering optimal combinations of performance and power savings. The DT395BV is available with Windows® or Android operating system.
PAGE 2
DT395BV: ENGLISH 2
PAGE 3
Input/ Output Ports A Barcode Scanner (optional) B Headphone Jack C USB Port D DC Power Input E Camera (optional) F LAN/ HDMI (optional) G LAN/ RS232 (optional) Button Functions BUTTON ACTION 1 Security button. As scanner trigger when equipped with the scanner module 2 3 Power on. Push/release typically enters Standby mode, or Push/release exits Standby mode or restarts (software dependent) Push and hold (over 4 seconds) invokes hardware shutdown Wi‐Fi switch. 4 Menu button.
PAGE 4
OPERATION Internal Battery Warning! ! The Internal battery pack should only be replaced by an authorized DT Research service representative. Please contact your product and/or service provider for internal battery replacement service. Powering ON and OFF To activate the DT395BV, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT395BV in Standby mode, push and quickly release the Power Button.
PAGE 5
Start Up If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10‐15 seconds to be established. Configuring the DT395BV The tablet may be configured using the utilities and methods dictated by the software operating system. The DT395BV should be configurable for various properties such as user profiles, network features, and several system elements.
PAGE 6
Power/Battery LED Status: • • • • • Blue indicates the battery is 25% to 100% charged Blinking blue indicates the battery is charging Orange indicates that the battery is between 11% to 25% Blinking Orange indicates that the battery is below 10% Blinking blue and orange alternately indicates the battery is being warmed up. Do not unplug the AC/DC adapter. Precautions • • • Always exercise care when operating and handling the DT395BV. Do NOT apply excessive pressure to the display screen.
PAGE 7
Remote Management Depending on software configuration, the DT395BV can be centrally managed for asset monitoring and for software control. Please consult your device provider. For More Support Users can download the Tablet Modules Basic Operation Guides from the DT Research website. If the DT395BV comes with a 3G module, please contact your product and/or service provider for the SIM Card installation procedures.
PAGE 8
DT395BV Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 9
DT395BV Specifications: System CPU Intel® Celeron® Dual Core, 1.58GHz RAM 4GB Storage Operating System Display 64GB flash Microsoft® Windows® Embedded Standard 7, 7 Professional, 8.1 Pro Industry or Android 9” LED‐backlight screen with capacitive touch; anti‐reflection outdoor viewable Display Resolution Network Interface Control Switch and Buttons Indicator 1280 x 800 (WSVGA) Wi‐Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.