User's Manual

ManualsBrandsDT Research ManualsComputers & AccessoriesMobile Tablet





DT311

BASICOPERATIONGUIDE





ENGLISH



INTRODUCTION

ThankyouforacquiringthelatestadditiontoDTResearch’slineoftablets—theDT311.

Featuringaslimyetrobustenclosure,theDT311with11.6”TFTdisplayispoweredbytheIntel®

processor,offeringoptimalcombinationsofperformanceandpowersavings.

TheDT311isavailablewithMicrosoft®operatingsystems.Eachsoftwareoperatingsystem

featureswebbrowser,client/servercomputingsoftware,mediaplayer,accessories,and

applicationssupport.



PACKAGECONTENTS

•OneDT311withBatteryPackandHandstrap

•CapacitiveTouchStylusandLanyard

•AC‐DCPowerAdapterwithPowerCord

•BasicOperationGuide

 *Theactualpackagecontentsmayvarydependingontheconfigurationacquired.



 

DT311



Summary of content (10 pages)

PAGE 1
DT311 BASIC OPERATION GUIDE ENGLISH INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of tablets — the DT311. Featuring a slim yet robust enclosure, the DT311 with 11.6” TFT display is powered by the Intel® processor, offering optimal combinations of performance and power savings. The DT311 is available with Microsoft® operating systems. Each software operating system features web browser, client/ server computing software, media player, accessories, and applications support.
PAGE 2
DT311: Input/ Output Ports Button Functions A USB 3.
PAGE 3
Power/Battery LED Status: • • • • Blue indicates the battery is 25% to 100% charged Blinking blue indicates the battery is charging Orange indicates that the battery is between 11% to 25% Blinking Orange indicates that the battery is below 10% Precautions Always exercise care when operating and handling the DT311. Do NOT apply excessive pressure to the display screen. Avoid prolonged exposure of the display panel to any strong heat source.
PAGE 4
OPERATION Internal Battery Warning! ! The Internal battery pack should only be replaced by an authorized DT Research service representative. Please contact your product and/or service provider for internal battery replacement service. Powering ON and OFF To activate the DT311, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT311 in Standby mode, push and quickly release the Power Button.
PAGE 5
Start Up If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10‐15 seconds to be established. Configuring the Mobile Tablet The DT311 may be configured using the utilities and methods dictated by the software operating system. The DT311 should be configurable for various properties such as user profiles, network features, and several system elements.
PAGE 6
DT311 Bluetooth The Bluetooth configuration application is enabled from the System Tray or from the Windows Mobility Center. Follow the instructions and options provided within the application to configure and invoke Bluetooth connectivity with the corresponding peripherals. USING THE MOBILE TABLET Peripherals Support Through its USB port, the DT311 supports a wide range of USB‐based peripherals.
PAGE 7
Federal Communication Commission Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 8
DT311 Specifications: DT311 Item System CPU Intel® Core™ i7, 2.4GHz (4M Cache, up to 3.0GHz) RAM 8GB Storage 64GB to 512GB flash Operating System Display Microsoft® Windows® Embedded Standard 7, 7 Professional, Embedded 8 Standard or 8.1 Pro Industry 11.6” LED‐backlight screen with capacitive touch Display Resolution 1920 x 1080 (Full‐HD) Network Interface Wi‐Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.
PAGE 9
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 10
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.