User's Manual

ManualsBrandsDT Research ManualsComputers & AccessoriesMobile Tablet

DT398H

ENGLISH 1

DT398H

BASIC OPERATION GUIDE

INTRODUCTION

Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT398H.

Featuring an IP65-rated, slim yet robust enclosure, the three-pound DT398H with 9.7” TFT display is

power savings.

The DT398H is available with Microsoft® Windows® Embedded Standard 7, 7 Professional,

Embedded Standard 8 or 8.1 Industry Pro, or Linux operating systems. Each software operating

system features web browser, client/ server computing software, media player, accessories, and

applications support.



PACKAGE CONTENTS

 DT398H with internal battery pack, stylus, and bumpers

 AC-DC Power Adapter with Power Cord

 Basic Operation Guide

 Handstrap



Summary of content (8 pages)

PAGE 1
DT398H DT398H BASIC OPERATION GUIDE INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT398H. Featuring an IP65-rated, slim yet robust enclosure, the three-pound DT398H with 9.7” TFT display is powered by the Intel® Core™ i dual core processor, offering optimal combinations of performance and power savings. The DT398H is available with Microsoft® Windows® Embedded Standard 7, 7 Professional, Embedded Standard 8 or 8.
PAGE 2
DT398H Input/ Output Ports A e-SATA USB Hybrid Port Button Functions BUTTON ACTION Power on, B Headphone Jack C DC Power Input D Full Slot Smart Card Reader E SD Slot Push/release typically enters Standby  mode, or Push/release exits Standby mode or restarts device (software dependent) Push and hold (over 4 seconds) invokes hardware shutdown Programmable,  As scanner trigger when equipped with the scanner module  ENGLISH 2 Programmable
PAGE 3
DT398H Power/Battery LED Status:  Blue indicates the battery is 25% to 100% charged  Blinking blue indicates the battery is charging  Orange indicates that the battery is between 11% to 25%  Blinking orange indicates that the battery is below 10%  Blinking blue and orange alternately indicates the battery is being warmed up. Do not unplug the AC/DC adapter. Precautions  Always exercise care when operating and handling the DT398H.  Do NOT apply excessive pressure to the display screen.
PAGE 4
DT398H OPERATION Internal Battery Warning! The Internal battery pack should only be replaced by an authorized DT Research service representative. Please contact your product and/or service provider for internal battery replacement service. Powering ON and OFF To activate the DT398H, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT398H in Standby mode, push and quickly release the Power Button.
PAGE 5
DT398H Start Up If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established. Configuring the Mobile Tablet The device may be configured using the utilities and methods dictated by the software operating system. The DT398H should be configurable for various properties such as user profiles, network features, and several system elements.
PAGE 6
DT398H Bluetooth Management Where supported by software, many of the hard buttons on the DT398H are programmable to perform a function of the user’s choice. To activate the button re-assignment application, invoke the Button Manager application. Brightness Control To control the screen brightness, launch the System Utility. The System screen will display a Brightness control section with up and down arrows that can be activated with the stylus.
PAGE 7
DT398H USING THE Mobile Tablet Peripherals Support Through its e-SATA USB Hybrid port, the DT398H supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, software recovery and update. For More Support Users can download the Software Utility and Modules Operation Guides from the DT Research website.
PAGE 8
DT398H SPECIFICATIONS System CPU RAM Storage Intel® Core™ i7, 1.8GHz 8GB DDR3L 64GB Operating System Microsoft® Windows® Embedded Standard 7, 7 Professional, Embedded 8 Standard, 8.1 Industry Pro or Linux Display 9.