Medical Cart Computer, DT313 SERIES User’s Manual Version: 1.
Intended of Use: The DT313 series Medical Cart Computer is intended to serve as a display-integrated computing platform for integration with hospital system. This device is designed for general purpose for hospital environment. For data collection and display for reference. It shall not be used for life-supporting system. Product Introduction Thank you for acquiring the DT Medical Cart Computer DT313 series, a 13.
Customize Mobility Center Security Keyboard IEC 60417-5032: AC Atmospheric pressure limitation Humidity limitation Temperature limitation Version: 1.
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any DC outlet before cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage. 7.
DT Research, lnc. Taiwan Branch 6F., No.36 Wuquan 7 th Rd., Wugu Dist. New Taipei City 248 Taiwan TEL: (02)-2298-1039 21. MEDICAL – GENERAL MEDICAL EQUIPMENT AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH ANSI/AAMI ES 60601-1 (2005) + AMD (2012) &"CAN/CSA-C22.2 No. 6060-1 (2008) + (2014) 22. This equipment shall not be used for life support system. 23.
• • VESA mount (optional) ,expected service life:7 Years Desktop Charging Cradle(optional) ,expected service life:7 Years Warning Attention To prevent electric shock, Do not remove cover. No user serviceable parts inside, refer servicing to qualified personnel. This equipment must only be connected to a supply mains with protective earth. Pour éviter tout choc électrique, ne pas retirer le couvercle. L'intérieur ne contient pas de composants, se reporter l'entretien à du personnel qualifié.
Function Instructions 1. Input/ Output Ports and Button Functions Version: 1.
2. Power/Battery LED Status: 3. Basic Features The DT313SC-MD/ DT313T-MD wireless tablet integrates a bright and multi-touch display, one USB port, and embedded networking elements such as wireless LAN and Bluetooth. The DT313SC-MD/ DT313T-MD is complemented by a suite of accessories, including battery expansion, charging cradles, and battery charger kit, for a comprehensive user experience. A DT313SC-MD/ DT313T-MD typically integrates an 802.
• Configuring the Mobile Tablet The DT313SC-MD/ DT313T-MD may be configured using the utilities and methods dictated by the software operating system. The DT313SC-MD/ DT313T-MD should be configurable for various properties such as user profiles, network features, and several system elements. •Powering ON and OFF To activate the DT313SC-MD/ DT313T-MD, push and quickly release the Power Button. The display will come on in a few seconds.
•Refer to the access point operating manuals for setting up the 802.11 access points. •Bluetooth The DT313SC-MD/ DT313T-MD offers the Bluetooth module which supports Bluetooth 4.0 standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which delivers faster speeds (up to 300 Mbps) with low power consumption. USING THE MOBILE TABLET Peripherals Support Through its USB port, the DT313SC-MD/ DT313T-MD supports a wide range of USB-based peripherals.
Contact your distributor, sales representative, or DT RESEARCH customer service center for technical support if you need additional assistance. Please have the following information ready before you call: • Product name and serial number • Description of your peripheral attachments • Description of your software (operating system, version, application software, etc.) • A complete description of the problem • The exact wording of any error messages • This equipment is a source of electromagnetic waves.
3 . L'ordinateur est fourni avec une pile de l'horloge en temps réel du circuit. Il y a un risque d'explosion si la batterie est remplacée de manière incorrecte. Remplacez-la uniquement par une batterie de type identique ou équivalent recommandé par le fabricant. Jetez les piles usées conformément aux instructions du fabricant. (Remplacement des piles au lithium ou les piles à combustible par du personnel mal formé) Battery change 1.
Desktop Charging Cradle BASIC OPERATION GUIDE Thank you for purchasing the Desktop Charging Cradle (ACC-008-72H) by DT Research, available for charging one (1) Rugged Tablet. The Desktop Charging Cradle features one (1) DC-input jack, one (1) LAN port, one (1) HDMI-output port, one (1) COM port, and four (4) USB ports. Instructions: Connect the AC-DC adapter cable to the DC-input jack, and then insert the Tablet system properly for charging.
USB Port USB Port Specifications I/O Ports DC-in Jack 1 LAN Port 1 HDMI 2 USB Ports 4 (2 on the back panel, 1 on the left side, 1 on the right side) Mechanical and Environmental AC/DC Adapter* Input: 100 – 240V AC; Output: 19V DC,6.31A Dimensions (H x W 1.93 in x 7.13 in x 6.10 in / 49.1 mm x 179.7 mm x x D) 151.3 mm Weight 1.39 lbs / 630 g Temperature Operation: 0°C – 40°C; Storage: -20°C – 60°C Humidity 0% – 90% non-condensing * The AC/DC Adapter is not included in the standard package.
CAUTION: If using a 100 x 100 VESA stand or arm, the VESA Conversion Bracket is needed. Please place the VESA Conversion Bracket on the back side of the Cradle, and apply the four M4 screws. Inserting the Tablet into the Cradle 1. Use the key to unlock, and slide the latch on the bottom of the Cradle to loosen the Top Clasp. 2. Insert the bottom part of the Tablet into the cradle first with the connector parts correctly lined up. 3.
I/O Port RJ45 connector for Ethernet x 1 1 4 1 1 Ethernet COM USB 2.0 HDMI-out DC-in EMC Information Guidance and manufacture’s declaration – electromagnetic emission The device is intended for use in the electromagnetic environment specified below. The customer of the user of the device should assure that it is used in such an environment. Emission test RF emissions CISPR 11 RF emission Compliance Electromagnetic environment – guidance Group 1 The device use RF energy only for its internal function.
least 30%. Electrical fast transient/burst ±2 kV for power supply lines ±2 kV for power supply lines Mains power quality should be that of a typical commercial or hospital environment. IEC 61000-4-4 ±1 kV for input/output lines Surge ± 1 kV line(s) to line(s) ± 1 kV line(s) to line(s) IEC 61000-4-5 ± 2 kV line(s) to earth ± 2 kV line(s) to earth Mains power quality should be that of a typical commercial or hospital environment.
Radiated RF 10 V/m 10 V/m IEC 61000-4-3 80 MHz to 2.7 GHz d=1.2√P 80MHz to 800MHz d=2.3√P 800MHz to 2.7GHz Where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer and d is the recommended separation distance in metres (m). Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey, a should be less than the compliance level in each frequency range.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR Value of 0.55 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body. The SAR was conducted on the DT313 Mobile Tablet which installed the 8265NGW module. the SAR test distance is 0mm.
