User's Manual

ManualsBrandsDT Research ManualsElectronicsWLAN MODULE

DT398

ENGLISH 1

DT398

BASIC OPERATION GUIDE

INTRODUCTION

Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT398.

Featuring an IP65-rated, slim yet robust enclosure, the two-pound DT398 with 9.7” TFT display is

performance and power savings. An external battery expansion option provides approximately 3-4

hours of additional battery operation for up to eight hours of mobile usage.

The DT398 is available with Windows® Embedded Standard 7, Windows® 7 Pro or Linux operating

systems. Each software operating system features web browser, client/server computing software,

media player, accessories, and applications support.

PACKAGE CONTENTS

 One DT398 with Internal Battery Pack, Stylus and Bumpers

 AC-DC Power Adapter with Power Cord

 Basic Operation Guide

 Handstrap

Major options, depending on configuration:

 Desktop Charging Cradle with DC-in Power Jack and Ethernet/ USB Ports

 External Battery Pack and Battery Charger Kit

 Vehicle/ Wall Mount Cradle

Summary of content (9 pages)

PAGE 1
DT398 DT398 BASIC OPERATION GUIDE INTRODUCTION Thank you for acquiring the latest addition to DT Research’s line of mobile tablets— the DT398. Featuring an IP65-rated, slim yet robust enclosure, the two-pound DT398 with 9.7” TFT display is powered by the Intel® Celeron® or Core™ i dual core processor, offering optimal combinations of performance and power savings. An external battery expansion option provides approximately 3-4 hours of additional battery operation for up to eight hours of mobile usage.
PAGE 2
DT398 The DT398 Input/ Output Ports A USB Port Button Functions BUTTON ACTION Power on, B Headphone Jack C DC Power Input D Full Slot Smart Card Reader E SD Slot Push/release typically enters Standby  mode, or Push/release exits Standby mode or restarts device (software dependent) Push and hold (over 4 seconds) invokes hardware shutdown Programmable,  As scanner trigger when equipped with the scanner module   ENGLISH 2 Programmable Wi-Fi switch
PAGE 3
DT398 Power/Battery LED Status:  Blue indicates the battery is 25% to 100% charged  Blinking blue indicates the battery is charging  Orange indicates that the battery is between 11% to 25%  Blinking orange indicates that the battery is below 10%  Blinking blue and orange alternately indicates the battery is being warmed up. Do not unplug the AC/DC adapter. Precautions  Always exercise care when operating and handling the DT398.  Do NOT apply excessive pressure to the display screen.
PAGE 4
DT398 OPERATION Internal Battery Warning! The Internal battery pack should only be replaced by an authorized DT Research service representative. Please contact your product and/or service provider for internal battery replacement service. Powering ON and OFF To activate the DT398, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT398 in Standby mode, push and quickly release the Power Button.
PAGE 5
DT398 Start Up If the power up (from Standby or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established. Configuring the Mobile Tablet The device may be configured using the utilities and methods dictated by the software operating system. The DT398 should be configurable for various properties such as user profiles, network features, and several system elements.
PAGE 6
DT398 Bluetooth Management Where supported by software, many of the hard buttons on the DT398 are programmable to perform a function of the user’s choice. To activate the button re-assignment application, invoke the Button Manager application. Brightness Control To control the screen brightness, launch the System Utility. The System screen will display a Brightness control section with up and down arrows that can be activated with the stylus.
PAGE 7
DT398 USING THE Mobile Tablet Peripherals Support Through its USB port, the DT398 supports a wide range of USB-based peripherals. These peripherals are applicable for software installation, applications storage, data storage, docking or software recovery and update. The DT398 is complemented by an optional Desktop Cradle or Wall/ Vehicle Mount Cradle for support, pass-through charging, and connection to a range of USB peripherals, including keyboard and mouse.
PAGE 8
DT398 SPECIFICATIONS System DT398 CPU Intel® Atom™ Dual Core, 1.1GHz RAM 4GB Storage 8GB to 256GB Operating System Microsoft® Windows® Embedded Standard 7, Windows® 7 Professional, or Linux Display 8.4” LED-backlight screen with capacitive touch Display Resolution 800 x 600 (SVGA) Trusted Platform Module Yes, TPM 1.
PAGE 9
DT398 ENGLISH 9