Operation Guide

ManualsBrandsDT Research ManualsElectronicsWLAN Module

Rugged Handheld Tablet

BASIC OPERATION GUIDE

DT362GL

INTRODUCTION

The DT Research DT362GL Handheld Rugged Tablet features the integration of a high brightness 6”

capacitive touch screen and a high performance yet energy efficient processor within a slim, lightweight,

durable package. With built-in Wi-Fi, Bluetooth and a smart card reader as well as options for back camera,

barcode scanner, GNSS and UHF RFID reader, this robust tablet offers seamless information capture and

transmission for improved workflow. Rated IP65 and MIL-STD-810G, the DT362GL Handheld Rugged Tablet

provides reliable operation in harsh, mission-critical environments.

PACKAGE CONTENTS

• One DT362GL

• One Battery Pack and Handstrap

• AC-DC Power Adapter

• Basic Operation Guide

* The actual package contents may vary depending on the configuration acquired.

Summary of content (7 pages)

PAGE 1
Rugged Handheld Tablet BASIC OPERATION GUIDE DT362GL INTRODUCTION The DT Research DT362GL Handheld Rugged Tablet features the integration of a high brightness 6” capacitive touch screen and a high performance yet energy efficient processor within a slim, lightweight, durable package.
PAGE 2
PRECAUTIONS • Always exercise care when operating and handling the DT362GL • Do not disassemble any portion of the DT362GL, as this will void any product warranty. • Do not use any power adapter or charging cradle other than the one provided with the tablet or acquired from the manufacturer or its partners. • In the unlikely event that abnormal noise, strange odor, or smoke is present, immediately power down the DT362GL and disconnect all power sources.
PAGE 3
OPERATION Powering ON and OFF To activate DT362GL, push and quickly release the Power Button. The display will come on in a few seconds. To put the DT362GL in standby mode, push and quickly release the Power Button. To turn the DT362GL off for extended storage, power off safely using any software function that “shuts down computer” provided in the software operating system.
PAGE 4
Start Up If the power up (from Standby mode or otherwise) is successful, the appropriate interface will be displayed after a launch sequence of several seconds. The wireless LAN connection may take 10-15 seconds to be established. Wireless Networking Wireless LAN The DT362GL is often delivered with an embedded (user-inaccessible) 802.11ac LAN adapter equipped with a hidden custom antenna. • Through the support of typical WLAN adapters, the DT362G should be able to detect all 802.
PAGE 5
Data Capture Module Operation Guide If your DT362GL comes with a RFID Reader refer to the steps below to configure the settings. UHF RFID Reader: The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To develop an application to use the UHF RFID reader, contact your device provider for a UHF RFID reader API package NOTE: To ensure the system performance, turn on only the symbologies you are going to use.
PAGE 6
Specifications: DT362GL Item System CPU Intel® Pentium® Silver Quad-Core, 1.10GHz (up to 2.70GHz) RAM 8GB Storage 256GB Operating System Microsoft® Windows® 10 IoT Enterprise Display 6” LED-backlight capacitive touch screen Display Resolution 720 x 1440 Network Interface Wi-Fi 802.11ac, 2.4GHz/ 5GHz dual band; Bluetooth 4.2 LE Control Switch and Buttons 1 power button, 2 trigger buttons I/O Ports USB port USB Type-C x 1 (data transmitting and charging.
PAGE 7
CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.