Smart Watch USER MANUAL Thank you for choosing our smart watch. You can fully understand the use and operation of the equipment by reading this manual. The company reserves the right to modify the contents of this manual without any prior notice. The product contains: a packing box, a manual, a watch body, and a USB cable.
Watch function description Button description: Up button: Turn on and off the screen; one key to return to the main interface; long press to restart the watch. Button down: Short press to enter multi-sport mode. In addition, when the watch is in the off-screen state, the watch can turn on the screen by pressing the button. Charging instructions: Wireless charging, as shown in the figure below.
1.1 Shortcut function: 1) Swipe to the left to display the "+" icon, click the icon to add part of the menu as a shortcut function. 2) Slide down to display, Bluetooth connection status, time, power, brightness adjustment and other functions. 3) Swipe to the right to display, time/date/week, the latest message (enter to view multiple messages)/turn on or off Bluetooth for calls and display some of the recently used menu functions.
1.4 Phone/Call History 1. Enter the left swipe interface, click the call icon to turn on/off the Bluetooth phone, turn on Bluetooth, go to "About" to turn on Bluetooth, open the phone settings, search, Bluetooth name + the last four digits of the Bluetooth address, after connecting the phone to Bluetooth successfully, you can Use the watch to answer/hang up the Bluetooth phone. 2. Call records, which can save the records of connected and dialed calls.
1.8.1 Select the corresponding exercise mode, click the start button on the screen to enter the corresponding exercise mode; click the start button of the exercise being calculated to pause the exercise, click the end button to end the exercise and save the data. 1.8.2 When the exercise time is longer than 1 minute, the exercise data can be saved; when the exercise is saved under this condition, it will prompt "Too little data to save". 1.
After the watch is bound to the app, click on the phone to find the phone on the watch, and the phone will vibrate or ring tones. 2.7 Meteorology Click the weather on the watch side to display the ultraviolet (UV) and air pressure conditions of the day. 2.8 Breathing There are three modes of breathing: slow, moderate, and fast, which can be selected, and the breathing can be carried out according to the mode selected by the user. 2.
1.2 For Android end user: Search for “WearPro” in the Google Play App Store or any customized Android Store to download, remember to check the phone pop-up box to agree to the permissions when installing; 1.3 For IOS end user: Search for “WearPro” in the APP Store to download, remember to check the mobile phone pop-up box to agree to the permissions when installing; After WearPro is installed, the application icon is shown as: 2. Connect APP through mobile phone Bluetooth 2.
After canceling the Bluetooth connection on the APP, the green connection in the middle of the Bluetooth icon of the watch is released, and the blue outside the circle is still lit; 5. Unbind audio Bluetooth connection TO disable the audio Bluetooth connection, find the name of the audio Bluetooth in the Bluetooth settings of the mobile phone, and click "Ignore this device" to unbind all Bluetooth connections with the watch.
the reminder time for drinking water arrives, the watch will vibrate and there will be a drinking water icon. 14. Dial push 14.1 Push an existing watch face Connect to the app, go to Device>Dial Push>Select Dial>, and make sure to replace it with this dial. After the dial is synchronized, the watch will automatically restart and then automatically connect to the app. 14.
If you receive the goods and the watch does not turn on, it may be caused by a collision during the transportation of the watch and the battery Seiko board has been protected, so plug in the charging cable to activate it. If the battery is too low or the watch does not turn on after a long period of time, please plug in the data cable and charge it for more than half an hour to activate. Warranty description: 1.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.