FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
INSTRUCTION SHEET FOR 48413 WRIST WALKIES TALKIE 1. Open the battery door and insert the LR & LR button cells according to the diagram shown. 2. Push the “Power” button on the right hand side of the walkies talkie downwards to tur on the walkies talkie. 3. Press the “Talk” button, now the walkies talkie is in TX status, & can communicate with another walkies talkie. 4. If necessary, plug in the mono headphone to the “SPK” position for listening. 5.
Item No, 48417 USER MANUAL WARNING : Adjustment fo this unit or replacement of any transmitter component {crystal, semiconductor, etc.) to this unit could resulting a violation of the rules. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.