Instruction Manual

ManualsBrandsDryEasy ManualsElectronicsDryEasy Plus Wireless Bedwetting Alarm

Instruction Manual*

Attention

2. Do not place the receiver on floor or near any metallic object, for reception can be affected.

6. Keep using the alarm for 2 more weeks after dryness so as to lower the chance of relapse.

The receiver must be placed in the same room with the child but kept away from bed so that the child

needs to wake up to reset it.

The child must wear a pair of close-fitting underpants as urine can be detected faster. DO NOT wear loose

underpants or boxer shorts.

Parents are recommended to have a trial run of all steps for use of the alarm during day time with the child

before the first time use.

Rapid response to the alarm alert can enhance the success rate in overcoming bedwetting. Parents play an

important role, in particular at the initial stage, in awakening a sleeping child for urination and are

therefore recommended to sleep in the same room with the child for the first 2 weeks of using the alarm.

* Please visit the website www.bedwettingsolving.com/en/page.php?key=info for instruction manual in other languages.

FCC ID: 2AKU6-DE300V2

Summary of content (4 pages)

PAGE 1
FCC ID: 2AKU6-DE300V2 Instruction Manual* Attention 1. The receiver must be placed in the same room with the child but kept away from bed so that the child needs to wake up to reset it. 2. Do not place the receiver on floor or near any metallic object, for reception can be affected. 3. The child must wear a pair of close-fitting underpants as urine can be detected faster. DO NOT wear loose underpants or boxer shorts. 4.
PAGE 2
A. How to test the transmitter and receiver (The transmitter and receiver have been set on the same channel before delivery. They are ready for use. No pairing is required.) 1. Remove insulation tag from the transmitter, if any, before use. 2. Put 2AA alkaline batteries in the receiver. Ensure the batteries are inserted with correct polarity. 3. Make sure the power switch of the receiver is turned to “ON” position. 4. Test the transmitter by touching the sensor tip (metal prong) with a wet finger.
PAGE 3
D. How to stop the receiver from sounding when bedwetting occurs 1. Press the "Reset" button of the receiver. 2. Remove the wet material from the sensor. (If the sensor keeps attaching to the wet material, the receiver will go off every two minutes.) E. Channel selection (The transmitter and receiver have been set on the same channel before delivery. They are ready for use. No pairing is required. Should there be any interference from other wireless devices, you may change the channel.
PAGE 4
. Specifications: Transmitter Color: Light blue Size: 5.8 cm x 6.0 cm x 2.4 cm Power: 2AAA alkaline batteries Sensor: ToggleSmart sensor No. of channels: 16 Standard: FCC Certified Receiver Color: White Size: 7.2 cm x 9.1 cm x 2.0 cm Volume: 4 levels No. of sounds: 6 Random playing: Available Operation mode: (1) Sound and vibration, (2) sound only and (3) vibration only No. of channels: 16 Power: 2AA alkaline batteries OR Smart phone adaptor with output voltage of 5Vdc and current of 0.