follow us facebook.com/driftinnovation vimeo.com/driftinnovation instagram.com/drift_innovation twitter.com/driftinnovation DRIFTINNOVATION.
contents Thank you for purchasing the Drift Stealth 2 CUSTOMER SUPPORT Check our official website for firmware updates, customer support, news about our products and videos from our users. If you have any suggestions, comments or concerns, please contact our customer support team at: support@driftinnovation.
about your camera A B C D initial setup E MODE/ Tag / Simultaneous Photo Button I J K L CYCLE OPTION Button ACTION Button (On/Off/Rec/Stop) Status LED Lens “Up” Indicator Rear Hatch 1.3” Backlit LCD Screen 300° Rotating/Replaceable Lens HDMI Port (Micro-D) USB Port (Micro-B) Micro SD Card Slot Reset Button F 3 G H Rear Hatch Screw Point M 1. Unscrew and remove the rear hatch 2. Insert a Class 6 or higher Micro SD/HC/ card (up to 32GB) Format before first usage! 3.
package contents Universal Clip Mount Kit 5 getting started USB Cable (Micro-B) Goggle Mount POWER ON AND OFF 1. Press and hold the ACTION button to power on 2. The screen will power on, show the welcome display. 3. The camera is now ready to record video, or take still photos 4. The current camera mode is indicated by the icon in the top left of the display and by the LED indicator (for details, see p7-8) 5.
mode selection VIDEO MODE (Green LED) The camera will record video when ACTION is pressed on the camera or remote. The LED will flash red while recording. Press ACTION on the camera, or STOP on the remote, to end recording. PHOTO MODE (Yellow LED) The camera will capture still images when ACTION is pressed on the camera or remote. The LED will blink red every time a photo is taken (this applies for Timelapse and Photoburst modes also).
Screen references PHOTO MODE PHOTO MODE Screen references features PHOTO MODE MODE INDICATOR The Drift Stealth 2 features a multi-coloured status indicator light system. A front facing LED combined with a backlit LCD Display light up depending on the current camera mode. Either can be disabled in the general settings.
mounting the camera 1. Attach the Universal Clip to the camera in any 360° orientation as needed— first position the clip in the desired orientation, then secure by rotating the screw base by hand 2. Slide the Universal Clip into your chosen mount, ensuring that it ‘clicks’ into place *Double check it has been fully inserted by pushing out the clips accessory guide TWO-WAY REMOTE CONTROL 3. Align your shot. Rotate the lens by hand until the screen is orientated correctly.
wifi TURNING ON AND OFF In the Camera Settings menu, highlight the ‘WiFi’ option and press ACTION, and select P and press ACTION. The network name (SSID) of your camera will be ‘Stealth 2 XXXXX’ where the digits correspond to your camera’s unique serial number. 13 DOWNLOAD THE DRIFT APP Shot setup, record, capture & playback on your device. firmware connecting the camera UPDATING THE FIRMWARE Download the latest firmware from the Drift website (left) and copy the STEALTH 2.
specifications Video resolution: File format: Sensor type: Frame rate:1080p: 960p: 720p: WVGA: Field of view (diagonal): Lens focal range: Lens rotation: Photo mode: Exposure: LCD Screen: Water Resistance Microphone: Built-in memory: 15 1080p, 720p and WVGA (16:9); 960p (4:3) .MP4 (H.264 codec) CMOS 25 / 30 fps 25 / 30 fps 25 / 30 / 50 / 60 fps 25 / 30 / 100 / 120 fps 135° 0.5m to infinity 300° 12 / 5 / 3 megapixels Auto / Manual (advanced users) 1.
FCC Caution. Specific Absorption Rate (SAR) information: § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following This STEALTH 2 meets the government's requirements for exposure to radio waves.
