follow us facebook.com/driftinnovation vimeo.com/driftinnovation instagram.com/drift_innovation twitter.com/driftinnovation DRIFTINNOVATION.
contents Thank you for purchasing the Drift Ghost-S CUSTOMER SUPPORT about your camera | initial setup 3—4 package contents | getting started 5—6 Check our official website for firmware updates, customer support, news about our products and videos from our users. mode selection & settings If you have any suggestions, comments or concerns, please contact our customer support team at: support@driftinnovation.
about your camera A B C D initial setup E I MENU / Tag / Back Button LEFT Button / Zoom Out RIGHT Button / Zoom In ACTION Button (On/Off/Rec/Stop) Status LED Rear Hatch 2.0” LCD Screen J K L 1. Unscrew and remove the rear hatch 2. Insert a Class 6 or higher Micro SD/HC/XC card (up to 64GB) Format before first usage! 3. Lift the hinged battery slot cover and insert the battery as shown (below) 4.
package contents 5 getting started Remote Control Rechargeable Battery Connector Hatch Wrist Strap Universal Clip Mount Kit Goggle Mount USB Cable (Mini-B) Microphone Extension Cable POWER ON AND OFF 1. Press and hold the ACTION button to power on 2. The screen will power on, show the welcome display, then Live Preview 3. The camera is now ready to record video, or take still photos 4.
mode selection & settings Video Timelapse 7 Photo MODE SELECTION MENU The Mode Selection menu displays the icons for the four camera modes. Highlight the desired mode and press ACTION. The screen will return to Live Preview and the camera is ready to record. VIDEO MODE (Green LED) The camera will record video when ACTION is pressed on the camera or remote. The LED will flash red while recording. Press ACTION on the camera, or STOP on the remote, to end recording.
playback & camera settings CAMERA SETTINGS PLAYBACK Selecting the Playback icon opens the Mode Selection menu, and display the four camera mode icons. • Wi-Fi • Mic Sensitivity OFF / LOW / MED / HIGH The number of videos or photos is displayed beside each camera mode icon.
features CLONE MODE [NEW] Connect to multiple cameras with the new clone mode feature. Through Wi-Fi all cameras within the vicinity of each other will be able to “see” each other and communicate their current settings and recording modes to each other. The result is a synchronisation between cameras, if one camera starts recording, all synced cameras will record - this feature is perfect for capturing multiple angles.
using the two-way remote A C B The Remote is NOT waterproof. ACTION button STOP button C USB charging port (Remove covering before use) 13 POWER ON AND OFF 1. Hold the ACTION button to power on 2. The colour of the remote control’s LED indicator will show the current camera mode 3. The remote will automatically power off if it does not find a camera after 15s 4.
wifi TURNING ON AND OFF In the Camera Settings menu, highlight the ‘WiFi’ option and press ACTION, and select P and press ACTION. In Live Preview, wait for the WiFi indicator icon @ to show WiFi is enabled then, on your WiFi device, select the network: ‘Ghost-S [000]’. The three digit network name can be changed from the general settings menu. A Micro SD card must be installed to allow WiFi to work. 15 DOWNLOAD THE DRIFT APP Shot setup, record, capture & playback on your device.
specifications Video resolution: File format: Sensor type: Frame rate:1080p: 960p: 720p: WVGA: Field of view (diagonal):1080p: 960p: 720p: WVGA: Lens focal range: Lens rotation: Zoom: Photo mode: Exposure: 17 1080p, 720p and WVGA (16:9); 960p (4:3) .MP4 (H.264 codec) CMOS 25 / 30 / 50 / 60 fps 25 / 30 / 48 / 50 / 60 fps 25 / 30 / 50 / 60 / 100 / 120 fps 25 / 30 / 50 / 60 / 100 / 120 / 200 / 240 fps 90° / 127° / 160° 160° 160° 160° 0.
disclosures FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept interference received, including interference that may cause undesired operation. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device was tested for typical body‐worn operations. To comply with RF exposure requirements, a minimum separation distance of 5 mm must be maintained between the user’s body and the device, including the antenna. Third‐party belt‐clips, holsters, and similar accessories used by this device should not contain any metallic components. Body‐worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided.