User Manual

ManualsBrandsDreyoo ManualsElectronicsgarage door opener

Step 1: Confirm Color of Button Step 2:Programming Initiation

Check what color is the learn button

behind the garage door opener

Press and Hold the III and II button at the same time till the led

indicator flash 4 times and then release it

garage door opener Manual

Summary of content (4 pages)

PAGE 1
garage door opener Manual Step 1: Confirm Color of Button Step 2:Programming Initiation Check what color is the learn button Press and Hold the III and II button at the same time till the led behind the garage door opener indicator flash 4 times and then release it
PAGE 2
Step 3: Choose Code Type Within 8 seconds, Press and Release the remote control button(one of the 3 buttons) you wish to use, times according to the color of your learn button and the following chart Press Times Garage door opener type 1 Security+2.0 (Yellow Learning Button) 2 315.0042MHz Security+ (Purple Learning Button ) 3 390.0102MHz Security+ (Red or Orange Learning Button ) 4 390.
PAGE 3
Step 4: Garage Door Opener Learning Step 5: Programming Complete Press and immediately release the learn button, Press and hold the button on the remote control that you wish to use. then learn LED will glow steadily for 30 seconds. Release the button when the garage door openers lights blink or two Within 30 seconds... clicks are heard. If programming to other products, press the button a second time to activate the product.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.