BladeMaster PRO 87K USER GUIDE 2-2-1509, No.
Wireless Connection Indicator The connection indicator is static white in wired mode,static yellow in 2.4GHz wireless mode, and static blue in Bluetooth mode. And in Bluetooth mode, it is rapidly blinking when the keyboard is waiting for connecting. Power Indicator Power indicator will become green breathing when charging,no light when charging is finished, and red breathing when power is under 20%. Contents Introduction ........................... 1 English ..................................... 5 简体 ....
Introduction 1 6 5 3 5 5 4.1 4.3 4.5 4 4.2 4.4 4.6 1 2 3 7 8 2 1 FN + On-board memory setting 2 Windows Lock 3 Switch among three devices 4 Genius-Knob Functions 5 Report Rate Adjustment 6 4.1 Lighting Modes Switching (Static, Spectrum, Rainbow, Power Gauge, Breathing, Twinkling Stars, Reative, Marquee, Aurora, Icey Fire) 4.2 Brightness Adjustment 4.3 Backlit Rate Adjustment 4.4 Backlit Color Switching (1000Hz/1ms, 500Hz/2ms, 250Hz/4ms, 125Hz/8ms) 4.
DREVO POWER CONSOLE Full-featured Cloud Software Per-key custom to meet your various needs Updating your setting profile into on-board memory of keyboard 1.Open profile management; 2.Drag the profile you chose to zones of on-board memory (three zones in total); 3.Press FN+CTRL+F1/F2/F3 to activate setting profiles (G1/G2/G3) System Requirements - wired connection: Windows xp and above, mac OS - Bluetooth connection: Windows 8.1 and above, Mac OS 10.10 and above, Android 4.4 and above, IOS 7.0 and above - 2.
I. Connecting the keyboard EN V. DPC( DREVO POWER CONSOLE software) User Guide ·Connect the keyboard to USB port in PC/laptop via USB Type C cable. ·Long press FN+scroll lock to enter pairing mode of Bluetooth(when wireless indicator flash rapidly with bluelight), that means yourkeyboard is ready to connect device. ·Plug the wireless USB receiver into USB port of pc/laptop (Highly recommended). II.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
