User's Manual
4628
2
3
4626
Quick Installation Guide
LA N
DMX
max 10m.
Connect the Invisua Lightport to your local network
router (with internet access) via the supplied LAN cable.
(Recommended maximum distance Lightport-xtures:
10m. line of sight)
LA
N
DMX
Power the Invisua Lightport via the supplied 12V
power supply.
1 2
Check document “Network and Hardware
recommendations” in case the second LED does not light
up. (http://main.invisua.com/en/downloads/)
Verify that the second LED is ON to conrm internet
connection. (Blinking indicates having an IP address
obtained, full ON indicates internet connection)
1
Mount all the Invisua Masterspot 2 Track xtures on
your track.
It is recommended to position the xtures ordered
by serial number. In that way the xture sequence in
Invisua Create will be identical.
Masterspot 2 Track
12 VDC
12 VDC
www.invisua.com
1
2
3
4
5
5sec
1 2
Press button #1 on the Lightport for 5 sec. to initiate
commissioning of your system. (lamp indicator LED on the
Lightport will turn ON)
6
7
Of f
On
Of f
On
Within 30 sec. after pressing button #2, turn the Masterspot
2 Track xtures OFF and ON again, by disconnecting and
reconnecting the 230V power.