Instruction Manual

ManualsBrandsDreams ManualsFurnitureColorado Childrens Bed

COLORADO BUNK BED

Assembly Instructions

Date: 09-10-2008

413-00146

Do not throw away any of the packing or the instruction book until you have checked all the

components and fittings and the furniture is fully assembled.

In the unlikely event that this product has missing or damaged parts, please call 0870 3333 612 to

obtain spares.

Minimum No. of people

recommended to assemble

this product:

Approx assembly time:

hours

IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE

Page 1 of 8

2030mm

Colorado bunk bed

1035.5mm

780mm

693mm

1007 mm

2030 mm

780 mm

693 mm

Summary of content (8 pages)

PAGE 1
COLORADO BUNK BED 413-00146 Date: 09-10-2008 Assembly Instructions IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE 693 mm 693mm 780 mm 780mm 2030 mm 2030mm 1035.5mm 1007 mm Minimum No. of people recommended to assemble this product: Approx assembly time: 2 1 2 /2 hours Do not throw away any of the packing or the instruction book until you have checked all the components and fittings and the furniture is fully assembled.
PAGE 2
Components parts and fittings contained in the box Please sort out all parts before you begin to assemble the item. This to make sure you always use the correct part. Fittings A 29 pcs. Dowel - Ø10 x 40mm B 22 pcs. Barrel nut - M6 x 13mm 305 / 0003 C 1 pc. Allen key 4mm 303 / 0004 D 22 pcs. Bolt - M6 x 110mm E 4 pcs. Dowel - Ø12 x 60mm 304 / 0060 309 / 0002 F 8 pcs. Screw - Ø3.5 x 35mm 305 / 0018 H 7 pcs. Screw - Ø7 6 x 50mm G 60 pcs. Screw - Ø3.5 x 25mm 318 / 0002 318 / 0001 I 6 pcs.
PAGE 3
Key diagram and tools needed. Key diagram. 2 5 7 4 6 8 10 4 9 12 10 3 14 4 13 1 4 4 9 1 Tools needed. Knock the dowels "A" into the holes indicated on the side rails "4" and the side panels "5", "6", "7" and "8".
PAGE 4
Assembly Press the side "12" and "13" onto the steps "14" as indicated. Step 2 12 Fix the sides using screws "I" into the holes indicated. I I 14 I 13 14 14 I I I Fix the side rails "4" and the side panels "5" and "7" to the headboard "2" and the side rails "4" to the headboard "1" using bolts "D" and the barrel nuts "B" as shown. Step 3 D B 5 D 7 B Tighten the bolts using the allen key "C".
PAGE 5
Assembly D Step 4 D 5 3 7 B 1 4 B B 4 2 D B D B 4 D B Fix the headboard "3" onto the side rails "4" and the side panels "5" and "7" and the side rails "4" to the remaining headboard "1" using bolts "D" and barrel nuts "B" as shown. B 4 1 D Tighten the bolts using the allen key "C". Place the slats "9" and "10" onto the slatholders. Use the distance brick "11" to secure the correct distance between the slats. Step 5 10 9 x 13 G 10 G G G Fix the slats using the screws "G".
PAGE 6
Assembly Knock the dowels "E" into the holes indicated on the headboards "1". Step 6 2 Place the upper bed as shown. 3 E E 1 E E 1 Secure the assembly using screws "F" into the holes indicated.
PAGE 7
Assembly Fix the ladder onto the side rails "4" using screws "H". Step 8 Tighten the screws using the allen key "I" H 4 H 4 H H Place the side panels "6" and "8" onto the headboard "2" and the ladder and fix them onto the ladder using screws "H". Finally fix the side panels onto the headboard using the barrel nuts "B" and the bolts "D". D Step 9 D D B 6 8 B H H Note ! The top of the mattress MUST NOT exceed this marking. (Max.
PAGE 8
Assembly Dear customer. IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE This product complies with BS EN 747 - 1 : 2007 & BS EN 747 - 2 : 2007 The top surface of the mattress must not be above the line marked on the frame. (Max. high 177mm).The size of mattress should be : 920 x 1900 mm Do not allow children under 6 years old to use the upper bunk. Be aware of the danger of young children (under 6) falling from the upper bunk. Bed should not be used if any structural part is broken or missing.