Manual

ManualsBrandsDreamLine ManualsPlumbingAqua Ultra Collection 48 in. W x 58 in. H Frameless Hinged Tub Door in Satin Black

IMPORTANT

DreamLine

reserves the right to alter, modify or redesign products at any time without prior

notice. For the latest up-to-date technical drawings, manuals or any other details please refer

to your model’s web page on BathAuthority.com

Please read these instructions carefully before installing. If you have any questions regarding

installation, please contact our technical support specialists Monday through Friday 8:00 AM –

7:00 PM EST at Phone: 1-866-731-2244, Fax: 1-866-857-3638 or e-mail our technical support

group at Support@BathAuthority.com

For more information about DreamLine

products please visit www.BathAuthority.com

AQUA ULTRA

SHOWER DOOR & TUB DOOR INSTALLATION INSTRUCTIONS

Right hand door installation shown

Model# SHDR-3445720-01, 04

finish

01= Chrome

04=Brushed Nickel

Model# SHDR-3448580-01, 04

finish

01= Chrome

04=Brushed Nickel

Summary of content (13 pages)

PAGE 1
AQUA ULTRA SHOWER DOOR & TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals or any other details please refer to your model’s web page on BathAuthority.
PAGE 2
Preparation 1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece count with your packing slip. After opening all boxes and packages read this introduction carefully. Check that all of the needed parts are included in the package by checking off the components on the “Detailed Diagram of Shower Door Components”.
PAGE 3
Tools Required Waterproof Silicone Tape Measure Level “AQUA ULTRA” Ver 1 Rev.
PAGE 4
Detailed Diagram of Shower and Tub Door Components 7 5 1 3 8 4 10 11 6 12 13 2 Parts List 01 02 03 04 05 06 U-Channel 1 (wall profile) U-Channel 2 (bottom profile) Stationary glass Glass door Support bar Handle 1pc 1pc 1pc 1pc 1pc 1pc 07 08 10 11 12 13 Wall anchor Countersunk screw ST4.2×40 Countersunk screw ST4.2×25 Side anti-water strip Bottom anti-water strip Hinge 5pcs 5pc 2pcs 1pc 1pc 2pcs NOTE: Unpack your unit carefully and inspect it.
PAGE 5
Shower and Tub Door Installation 1. Place the U-Channel 2 (02) onto the Shower base or Tub. Adjust the U-Channel 2 position in the middle of the ledge. Mark the drill holes on the ledge through the predrilled holes in the U-Channel 2 and drill the holes using Ø1/8” drill bit. NOTE: If you are installing tub door and not drilling the holes for U-Channel 2, use rubbing alcohol to clean the tub ledge of dirt before applying silicone.
PAGE 6
2. Place the U-Channel 1 (01) on the UChannel 2 (02) vertically against the finished wall. Adjust the U-Channel 1 vertically using a level. Mark the drill holes on the wall through the predrilled holes in the U-Channel 1. Now drill holes in the wall using Ø5/16 drill bit and insert the Wall anchors (07). 1 4 Ø5/16” 2 5 See Fig. 3 & 4 for details. 3 Fig. 3 Fig. 4 “AQUA ULTRA” Ver 1 Rev.
PAGE 7
3. Apply waterproof silicone along the bottom surface and around the holes of the U-Channel 1 (01). Fasten the U-Channel 1 to the wall with the Countersunk screws ST4.2×40 (08). Apply Waterproof silicone into the groove of both U-Channels. waterproof silicone 1 3 See Fig. 5 for details. 2 4 Fig. 5 4. Slide the Stationary glass (03) into the groove of both U-Channels.
PAGE 8
5. Locate the Support bar (05). Adjust the Support bar to a proper position on the Stationary glass (03) and the wall. Level it horizontally. Hold it firmly and outline the bracket’s position on the wall. Remove the Support bar and detach the wall bracket from it. Place the bracket against its outlined position on the wall and mark the drilling hole. Drill the hole using Ø 5/16” drill bit; insert the Wall anchor (07) and fasten the bracket to the wall with the Countersunk screw ST4.2×40 (08).
PAGE 9
6. Attach the Hinges (13) to the Stationary glass (03) with the decorative bolts facing inside the shower. 1 See Fig. 9 & 10 for details. 2 Fig. 9 Fig. 10 “AQUA ULTRA” Ver 1 Rev.
PAGE 10
1 7. Bring the Glass door (04) onto the Shower base. Level up the Glass door next to the Stationary glass (03) and fasten the Hinges (13) on the Glass Door. Make sure the top edges of the Glass door and the Stationary glass are aligned. See Fig. 11 for details. 2 Fig. 11 8. Press the Bottom anti-water strip (12) on the bottom edge of the Glass door (04). Press the Side anti-water strip (11) on to the vertical edge of the Glass door. Install the Handle (06) to the Glass door (04). See Fig. 12 for details.
PAGE 11
9. Let silicone cure properly for about 24 hours. NOTE: If you are installing the tub door model and choose not to drill the holes for U-Channel 2 into the tub deck, please monitor the silicone and reapply as necessary to keep the door and panel in a safe and stable condition. See Fig. 13 for details. Fig. 13 “AQUA ULTRA” Ver 1 Rev.
PAGE 12
Product Maintenance BASES and BACKWALLS: To ensure a long life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface. GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use with a soft cloth.
PAGE 13
TEL: 866-731-2244 FAX: 866-857-3638 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Doors & Tub Doors please visit www.BathAuthority.com “AQUA ULTRA” Ver 1 Rev.