UNIDOOR SHOWER DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings, manuals or any other details please refer to the support.BathAuthority.com web page. Please carefully read the instructions before installing.
Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are included in the package, by marking all the components on the “Detailed Diagram of Shower Enclosure Components”. Examine boxes and packages for shipping damage. If the unit has been damaged, has a finishing defect, or has missing parts, please contact our customer support department within 3 business days of the delivery date.
Detailed Diagrams of Shower Door Components Diagram A Diagram B Diagram C 3 1 12 11 10 9 12 11 10 9 4 5 2 6 13 13 14 14 15 15 16 16 17 17 18 18 19 7 19 20 20 8 21 22 23 Packing List A 01 02 03 04 Glass door Handle Wall Anchor Countersunk screw ST5×50 09 10 11 12 13 14 Wall profile Glass profile Stationary glass Support bar Wall Anchor Countersunk screw ST 4.
Shower Door Installation 1. Attach the Hinges (05) to the Glass door (01). See Fig. 1 for details. Fig. 1 2. Place a piece of flat timber (5/8” thick) on the threshold or the shower base. Take the Glass door (01) and place it on the flat timber. Butt up the door with hinged side against the wall, adjust its position and level it. Be sure the door is absolutely vertical. 5/8" See Fig. 2 for details. Fig. 2 Rev 2.
3. Mark the drill holes for both hinges on the wall. Set the door aside, drill the holes in the wall using Ø 5/16” drill bit, and insert the Wall Anchors (03). Place the Glass door back on the flat timber and attach both hinges to the wall with the Countersunk screws ST5×50 (04). See Fig. 3 for details. PLEASE NOTE: The manufacturer strongly recommends to attach this heavy door to the studs or to preinstalled 2x6 wood reinforcement behind the wall. 1 3 2 4 Ø 5/16” Fig. 3 4.
5. Mount the Handle (02) to the Glass door (01). 1 See Fig. 5.1 for details. ATTENTION; Prior to the next step, please be sure the part of the wall for installation of the L-shaped strip (08) is clean, dry and free from soap, oil and any construction debris. 2 6. With the door closed place the L-shaped strip (08) on the door edge and mark its location on the wall. Please note that the corner of the L-shaped strip (08) should face inward. Open the door.
NOTE: If your door is more than 30” in width, you will need to add Stationary glass panel (11): a) For installation of the Stationary Glass with Support bar, you will need to refer to Packing List B. b) For installation of the Stationary Glass with Glass Shelves, you will need to refer to Packing List C. See Fig. 7 for details. Fig. 7 Rev 2.
Stationary Glass Installation 7. Apply clear silicone along the inner channel of the Glass profile (10) and push the Stationary glass (11) inside the channel. NOTE: If you have difficulty sliding the Glass profile over the Stationary glass, you can slightly tap on the Glass profile with a rubber hammer and a piece of wood. 1 3 2 4 See Fig. 8.1, Fig. 8.2 and Fig. 8.3 for details. NEVER use the metal hammer or hit the profile without the wood bumper. 8.
10. Draw a line along the inner edge of the Wall profile on the wall. Detach the Wall profile from the Stationary glass and the Glass profile assembly. Place the Wall profile to the outlined position and mark the drilling holes through the predrilled holes in the Wall profile. Now drill the holes using Ø 5/16” drill bit in the wall and insert the Wall anchors (13) into the holes. Apply silicone along the Wall profile and around the holes. Fasten the Wall profile to the wall with the Round head Screw ST4.
12. After final adjustments of the Stationary glass drill the holes in the Glass profile through predrilled holes in the Wall profile using Ø 1/8” drill bit. 1 Ø 1/8” NOTE: You only need to drill through the first layer of the Glass Profile. 2 Use Countersunk screws ST4.2×18 (14) to attach the Wall profile to the Glass profile. Cover the exposed screw heads with Decorative Plugs (17). See Fig. 12 and Fig. 13 for details. 3 Fig. 12 If the Stationary Panel installation is finished.
Support bar installation 13. Locate the Support bar (12). Adjust the bar to a proper position on the glass and the wall. Level it horizontally. Hold it firmly and outline the bracket’s position on the wall. Remove the Support bar and detach the wall bracket from it. Place the wall bracket against its outlined position on the wall and mark the drilling hole. Drill the hole using Ø 5/16” drill bit; insert the Wall anchor (13) and fasten the wall bracket to the wall with the Screw ST4.2×30 (15).
Glass shelves installation 15. Mark the Glass shelf (12) position on the wall. According to the measurements in Fig. 16.1, mark the drilling holes for the shelf brackets. Drill the holes using Ø 5/16” drill bit and insert the Wall anchors (13). Attach the Shelf brackets (without nut) (22) to the wall using the Countersunk screw ST4.2×25 (23) and attach the Shelf brackets (with nut) (21) to the Stationary glass (11).
16. Apply the sealant along the connection of the Stationary glass and the Shower base or the threshold. See Fig. 18 for details. caulk Fig. 18 Maintenance To insure long lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
WARRANTY DREAMLINE™ LIMITED WARRANTY This is Bath Authority LLC’s (“DreamLine”) exclusive written warranty effective April 2, 2012 This warranty extends only to the original owner/end-user for household use only and is not transferable to a subsequent owner. This warranty applies only to DreamLine™ products purchased from an authorized dealer and installed in United States or Canada. Proof of purchase (original sales receipt) must be provided with all warranty claims.
TEL: 866-731-8378 – 215-957-1411 FAX: 866-227-9245 – 215-893-1780 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Doors please visit www.BathAuthority.com Rev 2.
