Installation Sheet

Important Model Information
A
Guide Rail Brackets must be firmly
attached to the wall. Installation into a
stud is strongly recommended.
All of the guide rail bracket set screws
must be accessible and tightened.
B
Thread Lock must be applied to the
set screws in both stoppers.
Panel-side stopper must be installed
into the pre-drilled stopper hole in
the upper guide rail.
Door-side stopper must be installed
at the proper position to prevent the
door from contacting the wall.
E
Bulb Vinyl Seal must be installed on the
closing edge of the Door Glass.
D
Lower Roller Wheel Assemblies must be
adjusted during installation to make
contact with the Upper Guide Rail.
Tighten safety set screws. Apply thread
lock.
F
The Guide Block must be screwed to the
threshold and installed square with the Panel
Glass and Door Glass. Installing the guide
block crooked may damage the bottom edge
of the Door Glass and lead to breakage.
C
Roller Wheel Assembly safety set
screws: must be accessible and must
be retightened with Thread Lock
during installation.
PLEASE READ THE ENCLOSED INSTALLATION
MANUAL FOR DETAILS REGARDING PROPER
INSTALLATION.
THE LATEST VERSION OF THE INSTALLATION
MANUAL IS AVAILABLE TO VIEW OR PRINT ON
DREAMLINE.COM
G
SafeStop™ Bumper must be secured in
position with 3M™ tape or screwed to the wall.
IMPORTANT INFORMATION
REGARDING THE INSTALLATION
OF THIS SHOWER DOOR
ENIGMA-XO Shower and Tub Door Manual Ver 1 Rev 7 022022 4
©2021 DreamLine
®
All Rights Reserved
*Right-hand door installation shown
A
A
B
B
D
G
F
E
C
!