Installation Sheet

Parts Needed

Door Stopper Installation

ENIGMA-XO Shower and Tub Door Manual Ver 1 Rev 7 022022 35

x1set

2”

minimum

small inline

panel glass

1 2 3

Position the door-side

Stopper (#01)

to allow enough clearance

for the handle.

door side

3”

(+/- 1/8”)

approximately

Door Stopper Installation:

1. Remove the set screw

2. Slide the Door Stopper (#01) onto the Top Guide Rail (#03)

3. Align with stopper hole in the guide rail (inline panel side only) (Fig 24.2)

4. Apply Thread Lock Adhesive (#26) to the set screw threads

5. Tighten screw into the stopper hole (inline panel side only)

6. Correctly position the door side stopper, use Thread Lock Adhesive (#26)

and tighten the set screw. (Fig 24.5)

*For 72” Model: Position the

door-side Stopper (#01) at

least 2” away from the small

inline panel glass so that the

handle cannot make contact

with the glass when the door

is in the closed position.