Installation Sheet

Tools Needed

ENIGMA-XO Shower and Tub Door Manual Ver 1 Rev 7 022022 21

**Step #11 has an option for installing the guide rail brackets to the wall using anchors. However,

the manufacturer strongly recommends installing the guide rail brackets into studs or to

pre-installed 2”x 6“ wood reinforcements behind the wall in the area where the guide rail

brackets will be attached to the wall.

Fig 10a

base

sleeve

Fig 10b

72”

MODEL

ONLY

Fig 10c

Separate the Guide Rail Bracket (#08) base from the sleeve by loosening the set screws. Leave the

sleeves on both ends of the Top Guide Rail. For enclosure installation only: remove the Guide

Rail Bracket (#08) base on the side that will meet the Return Panel and refer to the

Enigma-X/Enigma-XO Enclosure Return Panel Manual.

NOTE