Installation Guide

© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
Parts Needed
CREST Shower Door Manual Ver 1 Rev 2 022020 29
©2020 DreamLine® All Rights Reserved
If there is a gap found between the Roller (#22)
and Door Glass (#11) notch:
- Insert the provided 1mm or 2mm Shims (#24)
into the gap.
- Use the same amount of shims in both rollers.
- Do Not exceed 3mm of shims per Roller.
Fig 22a
Fig 22b
Max. Door Glass
Height
Min. Door Glass
Height
Door Glass
Too Low !
!
2mm
1mm
inside
inside
24
x2ea
2 mm
1 mm
NOTE
door glass panel glass
door glass
panel glass
door glass
door glass
panel glass
panel glass
The top edge of the Door Glass (#11)
should extend between 6mm and 10mm
into the Guide Rail Inserts (#05).
22