Installation Guide

Tools Needed

Parts Needed

CREST Shower Door Manual Ver 1 Rev 2 022020 19

NOTE

See NOTE

◾If a stud is present behind the wall:

drill a Ø3/16”(4mm) hole

up to the stud,

drill an Ø1/8” (3mm) pilot hole into the stud

ST4.2 x 40mm Countersunk Screws (#07)

◾If no stud is present behind the wall:

drill a Ø5/16”(7mm) hole and insert the Wall Anchors (#08)

and use the ST4.2 x 40mm Countersunk Screws (#07).

Fig 12

left-hand door installation shown

Cover the bottom profile with tape or

cloth before drilling to prevent debris

from getting into the channel.

1 2 3

TIP