Installation Guide

©2018 DreamLine. All Rights Reserved
13PRISM shower enclosure manual Ver 1 Rev 4 05/2018
!
Allow 24 hours for the silicone to cure before using the shower.
Fig 10
Fig 9
knob
door
outside
24
Hours
9. Install the Handle (#06) onto the outside of the Door Glass (#04). (Fig 9)
(put the knob on the magnet/strike side of the door)
10. Apply a good quality mildew-resistant silicone along the interior edges of the Panel Glass (#03),
Wall Profiles (#02) and Pivot Bar (#05) to seal against the walls and threshold. (Fig 10)