Installation Guide

Tools

Tip: Measure the finished opening before

proceeding with the installation to be sure

that the correct model size has been

ordered.

Tip: Prior to installation, cover the

shower/tub drain with tape to prevent

losing screws or small parts.

NOTE: Unpack your unit carefully and inspect it. Lay it out and identify all parts using the detailed

diagram and packing list in this manual as a reference. Before discarding the carton, check for small

hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing,

please contact DreamLine

for replacement. The shipping boxes may contain extra parts not used in

your model configuration.

NOTE: Retain these installation instructions for future reference.

Tip: Set screw gun clutch to low setting

when installing screws and bolts to

prevent stripping the heads.

PRISM shower enclosure manual Ver 1 Rev 4 05/2018

Drill bit

(Ø1/8”)

Drill bit

(Ø5/16”)

Phillips

Screwdriver

Pencil

Level

Tape

Measure

Professional Grade

Glass Suction Cup

100% Silicone

Power

Drill

Hammer Mallet

Razor Knife

Hex Head driver bit

4mm

Threshold must be level.