User's Manual

WIRELESS CONTROLLER（2.4G）USER MANUAL

PRODUCT APPLICATION:

This wireless controller is designed for Playstation3 (both slim and original fat console), PC.

Built in 2.4Ghz technology. Very popular controller for racing ,fighting and other highly active

games on popular consoles such as PS3. Compatible with Windows2000/XP/Vista/WIN7 systems

and supports vibration function (with the installation of additional drivers)

··

INSTRUCTIONS

-Connect the receiver to usb PC outlet or PS3 console. LED will rapidly flash. This shows it searching for the controller

signal.

-Press PS button on controller，4 LED in controller slowly flash. Press PS button again. LED rapidly flash for about 10

seconds later letting you know the controller has connected with receiver.

-Receiver LED and controller LED will remain alight. This lets you know the controller and receiver are connected and

functioning properly.

*Remark: The controller LED go out when its connected to computer in digital mode; Pressing the PS button again will

put the controller in analog mode , illuminating the LED once again.

-To manually reset the controller, insert a very thin metal object (such as a paper clip or the tip of a ball point pen) for 3

seconds into the tiny whole marked by the words “reset.”

BUTTON 6/8

BUTTON 3

BUTTON 1

BUTTON 2

BUTTON 4

RIGHT 3D ANALOG/R3

START

BUTTON UP/DOWN./LEFT/RIGHT

SELECT

LEFT 3D ANALOG/L3

BUTTON 5/7

4LED SIGNAL Instruction

MINI USB

LED IN RECEIVER

SLEEP MODE

USB PLUG

PAGE 1
WIRELESS CONTROLLER（2.4G）USER MANUAL PRODUCT APPLICATION: This wireless controller is designed for Playstation3 (both slim and original fat console), PC. Built in 2.4Ghz technology. Very popular controller for racing ,fighting and other highly active games on popular consoles such as PS3.
PAGE 2
PRODUCT FEATURES 1）Bulit in 2.4Ghz technology; no signal delay 2）Automatic connect functionality between the controller and the receiver. The LED on the controller and receiver will maintain the signal with its illumination. 3）Built in power saving system in will stop the signal when voltage is reduced ( The LED light in the controller will continuously flash). The user can press „SELECT” and “R3” button simultaneously to turn off the vibration function.