User Manual

ManualsBrandsdreamGEAR ManualsElectronicsFalcon controller

Falcon Controller Manual

Product Features:

 3 Mode: Wired, 2.4G wireless, Bluetooth

 Support PC (Windows), Android

 L4 L5 R4 R5 Back Paddle

 L4 L5 R4 R5 Mapping switch

 Xinput (Wired) + Dinput (Bluetooth) + Xinput (2.4G)

 Include USB dongle

 LED indication for each Mode

 Powered by two AA Batteries

 Precise Hall Sensor Triggers

 Trigger lock support quick shot for FPS games

Summary of content (7 pages)

PAGE 1
Falcon Controller Manual Product Features:           3 Mode: Wired, 2.4G wireless, Bluetooth Support PC (Windows), Android L4 L5 R4 R5 Back Paddle L4 L5 R4 R5 Mapping switch Xinput (Wired) + Dinput (Bluetooth) + Xinput (2.
PAGE 2
Button List: Wired Android (Bluetooth) Windows (2.4G) NO Button USB with Xinput Bluetooth Dinput Mode 2.
PAGE 3
Bluetooth Mode: Bluetooth Pairing: 1. Install two AA batteries into the battery bay 2. Slide the Mode switch to left side 3. Holding Home button for 5 secs until the LED quick flash in Blue, now the controller entering the Bluetooth Pairing mode 4. Go to the Bluetooth setting on the Android device, click the “Bionik Falcon Controller” to connect 5. The LED will stay on Blue when success connected 6.
PAGE 4
2.4G Mode: 1. 2. 3. 4. Insert the USB dongle to the USB port of PC Install two AA batteries into the battery bay Slide the Mode switch to right side Single press the Home button to connect to the USB dongle, the LED will slow flash in Green until success connected 5. LED will stay on GREEN when success connected 6. Go to “Game Controller” at the Control Panel to test the controller Button Mapping: L3, L4, R3 and R4 button could be mapping to the designed button by 4 switchs.
PAGE 5
Mapping function ON/OFF Switch:   Slide Up to Turn OFF the mapping functions Slide Down to Turn ON the mapping functions Low Power: At the Bluetooth and 2.4G Mode, the LED will slow flash (10s once) when the battery in low.
PAGE 6
PAGE 7
FCC Warnings This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.