DFirst-201BT S Quick Reference Guide www.dreamautos.
Thank you for purchasing this DFirst-201BT Tool,201BT allows you to code your car yourself, customize it according to your wishes and unlock hidden features. One touch away from your mobile APP, no computer needed, Coding made easy. 1.
tested. It is crucial to use proper service methods and test procedures. It is essential to perform tests in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area, the device being used, or the vehicle being tested. Before using the device, always refer to and follow the safety messages and applicable test procedures provided by the manufacturer of the vehicle or equipment being tested. Use the device only as described in this manual.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury to the operator or to bystanders. Safety Instructions The safety messages herein cover situations DreamAutos is aware of. DreamAutos cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety.
2. Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous. 3. Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged. 4. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing. 5. Do not connect or disconnect any test equipment while the ignition is on or the engine is running. Keep the test equipment dry, clean, free from oil, water or grease.
generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure. 2. General Introduction 1: Vehicle Data Connector (16-pin) – connects the DFirst-201BT to the vehicle’s 16-pin DLC directly. 2: Power LED – indicates system status: a. Green:Lights solid green when the DFirst-201BT is plugged in and not connected with the device; b. Blue:Lights solid blue when the device is connected with the DFirst201BT via Bluetooth. c.
communicating with the DFirst-201BT; d. Red:Lights solid red when the DFirst201BT is update failed, you need to forced upgrade in app. 3. Technical Specifications Input Voltage Range 9V – 16V Supply Current 100mA@12V Sleep Mode Current 15mA@12V Communications BLE5.0 Wireless Frequency 2.4GHz Operating Temp. 0℃ ~ 50℃ Storage Temp. -10℃ ~ 70℃ Dimensions (L * W * H) 57.5mm*48.6mm*22.8mm Weight 39.
4. Getting Started: NOTE The images and illustrations depicted in this manual may differ slightly from the actual ones. The user interfaces for iOS & Android devices might be slightly different. 1. Download the DFirstCoder APP Search for “DFirstCoder” in the App Store or in Google Play Store, The DFirstCoder App is FREE to download. 2. Login or Sign Up Open the DFirstCoder App and tap Register near the bottom right of the screen. Follow the on-screen instructions to complete the registration.
Status, select your device and connect to it in the APP d. After the Bluetooth connection, Wait until the app deteced the VIN, Finally bind account, VIN and VCI. 4. Start to Use Your DFirst-201BT The bound account and vehicle can be coded with the current device for free, you can use all the functions of your DFirst-201BT device, such as: Auto Start Stop function memory, Start animation, Checkbox acoustical lock confirmation… www.dreamautos.net/support@dreamautos.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.