VigorAP 810 802.11n Access Point Quick Start Guide Version: 1.0 (For future update, please visit DrayTek web site) Date: Dec. 13, 2013 Warranty We warrant to the original end user (purchaser) that the router will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase.
Package Content Quick Start Guide CD RJ-45 Cable (Ethernet) Antenna The type of the power adapter depends on the country that the router will be installed: UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type Power Adapter
Descriptions of Components LED Status Explanation ACT LAN B Off Blinking On Blinking On LAN A1 - A4 Off Blinking On The system is not ready or is failed. The system is ready and can work normally. A USB device is connected and active. The data is transmitting. A normal connection is through its corresponding port. LAN is disconnected. Data is transmitting (sending/receiving). A normal connection is through its corresponding port. LAN is disconnected. Data is transmitting (sending/receiving).
client to connect with it. USB Connector for a printer. Interface Description LAN B Connecter for xDSL / Cable modem or router. LAN A1 (PoE) - A4 Connecter for xDSL / Cable modem or router. Restore the default settings. Usage: Turn on the router. Press the button and keep for more than 10 seconds. Then the router will restart with the factory default configuration. ON/OFF: Power switch. PWR: Connecter for a power adapter.
Installing Your Router This section will guide you to install the AP through hardware connection and configure the settings through web browser. Before starting to configure the router, you have to connect your devices correctly. 1. Connect VigorAP 810 to ADSL modem, router, or switch/hub in your network through the LAN A port of the access point by Ethernet cable. Note: You can also connect VigorAP 810 to a Vigor router via wireless connection. For detailed information, refer to VigorAP 810 User’s Guide.
Configuring Web Pages The Operation Mode is designed for you to easily set up your router for Internet access. Note: Such VigorAP is treated as DHCP client. So, if it is connected as the figure on the previous page, the default IP will be changed and assigned by the DHCP server of Vigor router. 1. Make sure your PC connects to the router correctly. 2. Open a web browser on your PC and type http://192.168.1.2 (for stand-alone installation). A pop-up window will open to ask for username and password.
4. The first page is set for 2.4G wireless connection. There are several operation modes for you to choose. Simply click any one of modes. In this example, choose AP and click Next. 5. For the SSID configuration, choose the mode you want and type related information for client authentication. Then, click Next.
6. In the next page, click Finish. The system will make a connection automatically. Open Online Status to see the result of network connection. Now, VigorAP 810 is ready for any station to connect for accessing Internet. Contacting Your Dealer If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.