Quick Start Guide

Interface Description

PWR Connector for a power cord.

ON/OFF Power Switch.

USB Connector for a USB device (for 3G/4G USB Modem or printer or

Environmental Thermometer).

W1 Connecter for local network devices or modem for accessing

Internet.

P1~P3 Connecters for local network devices.

W2/P4 The function of this connector is adjustable and controlled by web

user interface. It can perform the job as a WAN port (for accessing

Internet) or as a LAN port (for local network devices).

Wireless LAN

ON/OFF/WPS

Press "Wireless LAN ON/OFF/WPS" button once to wait for client

device making network connection through WPS.

Press "Wireless LAN ON/OFF/WPS" button twice to enable (WLAN

LED on) or disable (WLAN LED off) wireless connection.

Factory Reset Restore the default settings.

Usage: Turn on the router (ACT LED is blinking). Press the hole and

keep for more than 5 seconds. When you see the ACT LED begins to

blink rapidly than usual, release the button. Then the router will

restart with the factory default configuration.