Quick Start Guide

5. On the next page as shown below, please select the WAN interface that

you use. Then click Next for next step.

WAN1 (Ethernet/Fiber) and WAN2 (Ethernet) will bring up different

configuration page. Here we take WAN2 (Ethernet) as an example.

After choosing WAN2, please specify physical type. Then, click Next. On the

next page as shown below, please select the appropriate Internet access type

according to the information from your ISP. For example, you should select

PPPoE mode if the ISP provides you PPPoE interface.

PPPoE

1. Choose WAN2 as the WAN Interface and click the Next button. The

following page will be open for you to specify Internet Access Type.