Quick Start Guide

5. Software Configuration

To access Internet, please finish basic configuration after completing the

hardware installation.

The Quick Start Wizard is designed for you to easily set up your router for

Internet access. You can directly access the Quick Start Wizard via Web

Configurator.

1. Make sure your PC connects to the router correctly.

Note You may either simply set up your computer to get IP

dynamically from the router or set up the IP address of the

computer to be the same subnet as the default IP address of

Vigor router 192.168.1.1. For the detailed information, please

refer to the later section - Trouble Shooting of the guide.

2. Open a web browser on your PC and type http://192.168.1.1. A pop-up

window will open to ask for username and password. Please type

“admin/admin” as the Username/Password and click Login.

Note If you fail to access to the web configuration, please go to

“Trouble Shooting” for detecting and solving your problem.