Vigor2915 Series Dual-WAN Security Router Quick Start Guide (For RF Model) Version:1.0 Firmware Version: V4.0.
Intellectual Property Rights (IPR) Information Copyrights © All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. Trademarks The following trademarks are used in this document: Microsoft is a registered trademark of Microsoft Corp.
Hereby, DrayTek Corporation declares that the radio equipment type Vigor2915 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.draytek.com.tw/ftp/Vigor2915/Document/CE/ Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu County, Taiwan 303 Product: Vigor2915 Series Frequency Information for Europe area: 2.4G WLAN 5G WLAN 2412MHz - 2472 MHz, max.
USA Local Representative Company name Address ZIP Code Contact Person ABP International Inc. 13988 Diplomat Drive Suite 180 Dallas TX 75234 75234 E-mail rmesser@abptech.com Mr. Robert Tel. 19728311600 Messer Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The antenna/transmitter should be kept at least 20 cm away from human body. More update, please visit www.draytek.com.
Table of Contents 1. Introduction............................................................................................................1 2. Package Content....................................................................................................2 3. Panel Explanation..................................................................................................3 3.1 Vigor2915ac..................................................................................................................
1. Introduction Vigor2915 series is a broadband router which integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth. By adopting hardware-based VPN platform and hardware encryption of AES/DES/3DES, and hardware key hash of SHA-1/MD5, the router increases the performance of VPN greatly and offers several protocols (such as IPSec/PPTP/L2TP) with VPN tunnels.
2. Package Content Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Vigor Router Quick Start Guide RJ-45 Cat-5 Ethernet Cable Antenna x 2 The type of the power adapter depends on the country that the router will be installed. * The maximum power consumption is 18 Watt.
3. Panel Explanation 3.1 Vigor2915ac LED Status Explanation ACT Blinking Off On Off Blinking On Off Blinking On Off Blinking On Off Blinking On Blinking On Off Blinking On The router is powered on and running normally. The router is powered off. Internet connection is ready. Internet connection is not ready. The data is transmitting. The WAN/LAN port is connected. The WAN/LAN port is disconnected. The data is transmitting. The LAN port is connected. The LAN port is disconnected.
Interface Description PWR Connector for a power cord. ON/OFF Power Switch. USB Connector for a USB device (for 3G/4G USB Modem or printer or Environmental Thermometer). Connecter for local network devices or modem for accessing Internet. Connecters for local network devices. The function of this connector is adjustable and controlled by web user interface. It can perform the job as a WAN port (for accessing Internet) or as a LAN port (for local network devices).
3.2 Vigor2915Fac LED Status Explanation ACT Blinking Off On Off Blinking On Off Blinking On Off Blinking On Off Blinking On Blinking On Off Blinking On The router is powered on and running normally. The router is powered off. Internet connection is ready. Internet connection is not ready. The data is transmitting. The WAN/LAN port is connected. The WAN/LAN port is disconnected. The data is transmitting. The LAN port is connected. The LAN port is disconnected. The data is transmitting.
6
4. Hardware Installation This section will guide you to install the router through hardware connection and configure the router’s settings through web browser. Before starting to configure the router (taking Vigor2915ac for example), you have to connect your devices correctly. 4.1 Network Connection 1. Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router with Ethernet cable (RJ-45). 2.
4.2 Wall-Mounted Installation Vigor router has keyhole type mounting slots on the underside. 1. A template is provided on the Vigor router packaging box to enable you to space the screws correctly on the wall. 2. Place the template on the wall and drill the holes according to the recommended instruction. 3. Fit screws into the wall using the appropriate type of wall plug. Note 4. The recommended drill diameter shall be 6.5mm (1/4”).
5. Software Configuration To access Internet, please finish basic configuration after completing the hardware installation. The Quick Start Wizard is designed for you to easily set up your router for Internet access. You can directly access the Quick Start Wizard via Web Configurator. 1. Make sure your PC connects to the router correctly. Note 2.
3. Now, the Main Screen will pop up. Click Wizards>>Quick Start Wizard. Note 4. The home page will change slightly in accordance with the router you have. Enter the login password on the field of New Password and retype it on the field of Confirm Password. Then click Next to continue.
5. On the next page as shown below, please select the WAN interface that you use. Then click Next for next step. WAN1 (Ethernet/Fiber) and WAN2 (Ethernet) will bring up different configuration page. Here we take WAN2 (Ethernet) as an example. After choosing WAN2, please specify physical type. Then, click Next. On the next page as shown below, please select the appropriate Internet access type according to the information from your ISP.
2. Click PPPoE as the Internet Access Type. Then click Next to continue. 3. Please manually enter the Username/Password provided by your ISP. Click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
PPTP/L2TP 1. Choose WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click PPTP/L2TP as the Internet Access Type. Then click Next to continue.
3. Please type in the IP address/mask/gateway information originally provided by your ISP. Then click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
Static IP 1. Choose WAN2 as the WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click Static IP as the Internet Access type. Simply click Next to continue.
3. Please type in the IP address information originally provided by your ISP. Then click Next for next step. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 4. Now, you can enjoy surfing on the Internet.
DHCP 1. Choose WAN2 as WAN Interface and click the Next button. The following page will be open for you to specify Internet Access Type. 2. Click DHCP as the Internet Access type. Simply click Next to continue.
3. After finished the settings above, click Next for viewing summary of such connection. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. 5. Now, you can enjoy surfing on the Internet.
6. Customer Service If the router cannot work correctly after trying many efforts, please contact your dealer/DrayTek for further help right away. For any questions, please feel free to send e-mail to support@draytek.com. Be a Registered Owner Web registration is preferred. You can register your Vigor router via http://www.draytek.com. Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded.