Installation Instructions

Copyright © 2015 Draper Inc. Form Phantom-Table_Inst15 Printed in U.S.A.
Installation/Operating Instructions
Phantom Video Projector Lift for Tabletop Installation by Draper
If you encounter any difficulties installing or servicing your Phantom projector lift, call
your dealer or Draper, Inc. in Spiceland, Indiana, 765-987-7999, or fax [phone].
Outside the United States, fax [phone].
Planning
1 Based on screen location and projector specifications, determine proper
position for projector installation.
2 Confirm that there is adequate space for installation and operation.
3 Arrange to provide service access to the unit.
4 Total lifting capacity of lift is 26 lbs (11.8 kg), including projector and
closure panel.
5 The Tabletop Phantom comes with an Obstruction Shutoff feature. After
installation the sensitivity of this feature must be adjusted using a GUI
program (for Windows PC or laptop) and a Serial Programming/Control Kit
(included).
As Soon As Phantom Projector Lift Arrives
1 Open carton and inspect for damage.
2 Locate the following parts:
A. The unit itself
B. Controls
C. Serial Programming/Control kit
D. Any optional equipment
3 Test unit before installing.
4 Top of unit must be unobstructed after installation.
Installing Unit
The Phantom is provided with four (4) mounting points.
All installations should observe the following guidelines:
1 Installer must ensure that all fasteners and supports are of adequate
strength to securely support Phantom and projector. It is recommended
that hardware structure be able to hold at least four times the combined
weight of the lift and projector.
2 Fastening methods must be suitable for mounting surface, and securely
anchored so vibration or abusive pulling on unit will not weaken installation.
3 Top of unit must be unobstructed after installation.
Caution
1 Read instructions completely before proceeding.
2 Follow instructions carefully. Installation contrary to instructions
invalidates warranty.
3 Do not obstruct operation of the lift with fingers or any other object.
Serious injury or damage could result.
4 Before putting this unit into regular use, the Obstruction Shutoff
sensitivity must be adjusted using a GUI program available for download
at www.draperinc.com/go/Phantom.htm. A Windows PC or laptop is
required to operate the GUI program.
5 Closure panel or top of unit must be unobstructed to permit proper
operation.
6 Unit must be installed level (use a carpenter’s level).
7 Unit operates on 24V DC.
Note: Unit has been thoroughly inspected and tested at factory and found
to be operating properly prior to shipment.
These Installation/Operating Instructions are available in the official language
of the country where you purchase the product. Please contact your
distributor to request a copy.
Vous pourriez demander les instructions d’installation et d’opération traduises
dans la langue officielle du pays ou vous achetez le produit. Veuillez
demander à votre distributeur.
Die Gebrauchsanweisung für Installation und Konstruktion sind in der
offiziellen Sprache des Landes, indem Sie das Produkt gekauft haben,
vorhanden. Fragen Sie die jeweilige Verkaufs-Abteilung.
Important Safety Instructions
1 Do not use this apparatus near water or moisture—for example, in a wet
basement, near a swimming pool, etc.
2 Do not block any ventilation openings. Install in accordance with the manufac-
turer’s instructions.
3 Do not install near any heat sources, including radiators, heat registers, stoves,
or other equipment (including amplifiers) that produces heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug the apparatus during lightning storms or when unused for long periods
of time.
6 Refer all servicing to qualified personnel. Servicing is required when the ap-
paratus has been damaged in any way, including but not limited to: power
supply cord or plug cut, frayed or otherwise damaged; liquid spilled/objects
fallen into the unit; exposure to rain or moisture; unit not operating normally; or
unit has been dropped.
7 This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock. Where in a manufacturer’s service documentation, for
example in circuit diagrams or lists of components, a symbol “ ” is used to
indicate that a specific component shall be replaced only by the component
specified in that documentation for safety reasons.
8 When apparatus operation and installation instructions contain instructions for
use by service personnel, such instructions shall be separate in format from
other instructions and preceded by the word “CAUTION” and the following
or the equivalent. “These servicing instructions are for use by qualified service
personnel only: To reduce the risk of electric shock do not perform any servic-
ing other than that contained in the operating instructions unless you are quali-
fied to do so.”
9 The unit shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the unit.
WARNING/AVERTISSEMENT
RISK OF ELECTRIC SHOCK. DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
View from below
Caution: Beware
of pinch point.