Bluetooth Keypad User’s Manual DFB-02 Ortek Technology, Inc. 13F,No. 150, Jian Yi Rd. Chung Ho City, Taipei Hsien, Taiwan, R.O.C. Tel: 886-2-82265123 Fax: 886-2-82265125 Email: ortek@ortek.com.tw / w w w .ortek.
About This Manual This manual is designed to assist you in installing and using the Bluetooth Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2016 This document contains proprietary information protected by copyright. All rights are reserved.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC RF Radiation Exposure Statement: 1.T his T rans m itter m u s t not beco-located or operatingin conju nction w ith any other antennaor trans m itter. 2.For body w orn operation, this dev icehas been tes ted and m eets FC C R F expos u regu idelines .W hen u s ed w ith an acces s ory that contains m etalm ay not ens u recom pliancew ith FC C R F expos u re gu idelines .
Introduction Thank you for purchasing the Bluetooth Keypad. This User’s Manual contains information that will help to operate the device as well as answering questions about certain special keys and buttons. Please keep this manual in a safe place for future reference.
2. Power ON/OFF also need to press any key to reconnect and wait the blue LED turn off before using. Device pairing 1. Turn on the Bluetooth connection on the device 2. Turn on the keypad power and press the “CONN” button. (Please make sure the blue LED is flashing) 3. The device will search automatically. When “Bluetooth Keyboard” shows, choose “Connect”. 4. Enter the pin code that display on the device and press “Enter”. 5. Start using the Bluetooth keyboard. Device pairing Widcomm software: 1.
3. Click the “Search for devices in range” option, the “keypad” will be found. 4. Double click on the “Keypad” icon, it will pop-up another windows. Just follow the screen display to input the Pin Code then press “enter” (the keypads enter). 5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary.
6. The Bluetooth icon will become to . The Bluetooth keypad is ready to use. Toshiba software: 1. Right click on the BT icon and choose “Add New Connection” 2. Press the ‘Conn’ button at bottom of the Bluetooth keypad, then the led will start flashing. 3.
4. Choose the “Keypad” device and click “Next” 5. Just follow the screen display to input the Pin Code then press “enter” (the keypads enter).
6. Click “Next” 7. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 8. The Bluetooth icon will become to to use. 9 .
IVT Software: 1. Press the ‘Conn’ button at bottom of the Bluetooth keypad, then the led will start flashing. 2. Double click the BT icon on the system tray and it wills pop-up a windows. Choose “My Bluetooth” → ” Bluetooth Device Discovery” 3. It will find the “Keypad” device.
4. Just follow the screen display to input the Passkey then press “enter” (the keypads enter). 5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 6. The Bluetooth icon will become to to use. 11 .