Manualshelf

User's Manual

ManualsBrandsDräger Safety ManualsElectronicsFirefighting Communication System
12
Material / Werkstoff Modification Text / Änderungstext
Amends / Kommt vor
0X
Scale / Maßstab
General Tolerance / Allgemeintoleranzen
=EX= =QS= =QF=
Registration/
Ser.Type / Ser.art Docum. / Erf.beleg Doc.Type / Dok.art Total SL(tA) / Ges.halt. Min.u.time(tG) / Min.n.d
--- --- --- No/Nein
No/Nein
Created by/
Bearbeitung
Date / Datum
(dd.mm.yyyy)
Checked by /
Verantwortlich
Date / Datum
(dd.mm.yyyy)
Department /
Abteilung
Skrabs S 17.12.2015 Rüffert L 17.12.2015
st5430
Description / Benennung
DCC Number / Nummer Status / Reifegrad
FPS-COM 7000 Extract IFU
FPS-COM 7000 Extract IFU
/ /
Prep
Part No. / Sachnummer – Rev / ÄZ Appr./Zul.
SE23682 - 00
Y
Document Type / Dokumententyp
TEXT_DRAWING A4
Page / Seite
1
of / von
2
Repl. for / Ersatz für
Schutzvermerk ISO 16016 beachten.
Use of this document / contents is forbidden
without expressed written authority. All rights reserved.
Dräger Safety
Extract from Instruction for Use for FPS-COM 7000
(technical segment: “radio”, “EMC”)
Europe (EU):
EU Declaration of Conformity (accompanied by a copy of the EU declaration of conformity)
HINWEIS
Die abgebildeten Geräteaufkleber sind nur Beispiele. Die
jeweilige Klassifizierung ist auf dem Geräteaufkleber an der
Kommunikationseinheit aufgeführt
NOTICE
The device labels shown are intended as an example only.
The respective classification is indicated on the device label
on the communication unit.
Funkfrequenzen /
Radio frequencies
abgestarhlte Sendeleistung
(ERP) /
Effective radiated power
(ERP)
zugelassen in /
Approved in
863 MHz ... 865 MHz
(Teamfunk) / (Team radio)
≤ 10 dBm
EU, TR, CY
915 MHz ... 928 MHz
(Teamfunk) / (Team radio)
≤ 10 dBm
AU, NZ
2402 MHz ... 2480 MHz
(Bluetooth)
≤ 7 dBm
EU, US, CA, AU,
NZ
127 kHz
(LFC)
≤ -50 dBm
US, CA, AU, NZ
on the label:
“FPS COM 7000”
“863-865MHz”
Example:
USA/Canada:
“This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation.

Summary of content (2 pages)