2: Recordings / Reports Shift Report Cover 1 Cursor time minus selected report length (2, 4, 8, 12, 24 hrs) 2 Delay 3 Recording Speed 4 Patient information 5 Each waveform contains 5 seconds of pre-event data and 5 seconds of real-time data.
Reports Patient Status The Patient Status section of the Shift Report is a summary report focusing on a patient's arrhythmia status. A Patient Status Report is also available as an independent report and can be configured to print 2, 4, 8, 12, or 24 hours of data (page 12-24).
12: Recordings / Reports Graphical Trends In the Graphical Trends section of the Shift Report each parameter trend is plotted according to type. Parameter Type Appearance on Trend Graph Single-value, continuous such as HR Single, continuous line Single-value, intermittent such as C.O.
Reports Selected Events Depending on how many events you select (page 14-16) the selected events section may consist of up to three pages (4 waveform strips each). You must select each event that will appear in this section of the shift report by clicking on the icon so that a check mark displays on the icon. 1 Cursor time minus selected report length (2, 4, 8, 12, 24 hrs) 2 Delay 3 Recording speed 4 The waveform contains 5 seconds of pre-event data and 5 seconds of real-time data.
12: Recordings / Reports Graphical Trend Report The Graphical Trend Report is a multi-parameter report containing up to 15 trended parameters from bedside or telemetry patients. The report can be configured to print 2, 4, 8, 12, or 24 hours of Full or Event Disclosure data. The cursor time represents the report ‘stop time’; the report ‘start time’ equals ‘stop time’ minus the report length. You can customize the trend selection per patient (page 12-25) or at system setup (page 3-4).
