201(ER/ES) User ’s s Manual (3) LAN Information : view ADSL MAC Address and IP Address, Subnet Mask 18
01(ER/ES) User ’s s Manual (4) Setting WAN status : If you click “WAN” at the “Configuration ” section, the page is to appear as below. And check the VPI, VCI value.
201(ER/ES) User ’s s Manual NOTE: The VPI and VCI parameter is depend on ISP Ethernet Configuration Bridge Mode 20 Router Mode Router Mode (PPPoA / PPPoE) (Static IP)
201(ER/ES) User ’s s Manual WAN Configuration Enabled? Yes Yes Yes Static IP Address N/A N/A (AUTO) Provided by ISP Subnet Mask N/A N/A (AUTO) Provided by ISP 1483 Bridged IP LLC PPPoA LLC 1483 Bridged IP LLC WAN Advanced Configuration Encapsulation PPPoE LLC Bridge Enabled Disabled Disabled PPP Service Name N/A N/A(ISP PPP User Name N/A Provided by ISP N/A PPP Password N/A Provided by ISP N/A DHCP Client enable UnChecked UnChecked UnChecked Not Checked Checked Checked
201(ER/ES) User ’s s Manual - VPI, VCI Value EX) 0, 67 - ENCAPSULATION : PPPoA LLC - BRIDGE : Disabled 1-2) [WAN Configuration], then set the picture as follows.
201(ER/ES) User ’s s Manual Service Name : Name of ISP providerUsername : User ID Password : User Password 2) Setting as below, click [Execute] button and click [Save Configuration] to save the value. click [Submit] button to proceed.
201(ER/ES) User ’s s Manual 3) If you see the link lamp turn on, the value is saved in success. you can use internet. 2.
201(ER/ES) User ’s s Manual 1-1) When you click on the "WAN“ from"Configuration" section, Then set the VPI and VCI value. - VPI, VCI Value EX) 0, 67 - ENCAPSULATION : PPPoE LLC - BRIDGE : Disabled 1-2) [WAN Configuration], then set the picture as follows.
201(ER/ES) User ’s s Manual - PPP Service Name : Name of ISP providerUsername : User ID Password : User Password 2) Setting as below, click [Execute] button and click [Save Configuration] to save the value. click [Submit] button to proceed.
201(ER/ES) User ’s s Manual 3) If you see the link lamp turn on, the value is saved in success. you can use internet. 3.
201(ER/ES) User ’s s Manual 1-1) When you click on the "WAN“ from"Configuration" section, Then set the VPI and VCI value. - VPI, VCI Value EX) 0, 67 - ENCAPSULATION : 1483 Bridged IP LLC - BRIDGE : Enabled 1-2) [WAN Configuration], then set the picture as follows.
201(ER/ES) User ’s s Manual - PPP Service Name : Blank Username : Blank Password : Blank 2) Setting as below, click [Execute] button and click [Save Configuration] to save the value. click [Submit] button to proceed.
201(ER/ES) User ’s s Manual 3) If you see the link lamp turn on, the value is saved in success. you can use internet. Connect and disconnect the Internet. After installing 201, you can connect the Internet following procedure..
201(ER/ES) User ’s s Manual In case of 1483 Bridged Mode <> If the service type of your local ADSL service provider is PPPoE, please contact to your local ADSL service provider to get a PPPoE session client application. We describe the installation procedure of WinPoET, one of PPPoE session client applications which is generally used.
201(ER/ES) User ’s s Manual 3. In [Configuration Analysis] window, click “[Next]” button. 4. In [Destination Folder] window, click “[Next]” button if you want to use default folder. If you want to use different folder, click “[Browser]” button to select the folder.
201(ER/ES) User ’s s Manual 5. If [Installation Completed] window pops up, the installation is done successfully. Click the “[Next]” button for rebooting your PC. 6. After rebooting, you can find “ [WinPoET] ” shortcut icon on the wallpaper in your PC. Doubleclick “[WinPoET]” shortcut icon on the wallpaper in your PC.
201(ER/ES) User ’s s Manual 7. In [ WinPoET Dialer ] window, fill in User name & Password according your user account at ADSL ISP, then click “Connect” button. <> If you want to save the current information for future use, tick the “Save Password” box. 8. In a few seconds, the WinPoET icon appears in the system tray on your PC.
201(ER/ES) User ’s s Manual Then, connecting the Internet has finished. Disconnecting to the Internet Click the right button in your Mouse upon the WinPoET icon in the system tray. 1) move your mouse point over the WinPoET icon in the system tray. 2) Click the right button in your mouse. 3) select “ Disconnect ” and press enter to disconnect Int ernet.
