Data Sheet

Page 1 of 2

4091, 4091 Omni Mic, Low Sens, P48

The DPA 4091 is a high quality, low sensitivity omnidirectional

microphone, suitable for instrument miking applications in the studio or

on stage.

■

excellent for percussion

■

natural and open sound

■

handles high sound pressure levels with ease

The DPA 4091 is a high quality omnidirectional condenser microphone.

Due to its uniquely natural and open sound, the 4091 is suitable for

instrument miking applications in the studio or on the stage.

The 144 dB SPL handling means it can meet just about any challenge

including miking an electric guitar amp. An excellent microphone for

percussion instruments, the 4091 is also an ideal choice for wind and

string instruments. Due to their remarkably linear frequency response in

the 20 Hz to 20 kHz range, sound system engineers can also use these

mics for sound system alignment, testing and tuning.

The rugged and compact design features a 5.4 mm diameter

pre-polarized condenser capsule in a tapered body measuring just 12

cm (4.76 in).

For more information please visit:

www.dpamicrophones.com

PAGE 1
4091, 4091 Omni Mic, Low Sens, P48 4091, 4091 Omni Mic, Low Sens, P48 The DPA 4091 is a high quality, low sensitivity omnidirectional microphone, suitable for instrument miking applications in the studio or on stage. ■ excellent for percussion ■ natural and open sound ■ handles high sound pressure levels with ease The DPA 4091 is a high quality omnidirectional condenser microphone.
PAGE 2
4091, 4091 Omni Mic, Low Sens, P48 Directional characteristics: Omnidirectional Output impedance: < 40 ohm Principle of operation: Pressure Cable drive capability: Up to 300 m (984 ft) Cartridge type: Pre-polarized condenser Output balance principle: Impedance balanced Frequency range, ± 2 dB: 20 Hz – 20 kHz Common Mode Rejection Ratio (CMRR): > 40 dB Sensitivity, nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44.5 dB re. 1 V/Pa Power supply: 48 V Phantom power ± 4 V Equivalent noise level, A-weighted: Typ.