4560 CORE Binaural Headset Microphone User’s manual d p a m i c ro ph o ne s.
Introduction Congratulations on your new 4560 CORE Binaural Headset Microphone. Immersive sound is an emerging market and there are many possible uses for the 4560 CORE Binaural Headset Microphone. The 4560 is an appealing solution for applications such as sound system documentation, soundscape analysis, sound quality assessment, as well as sound for theatrical productions, podcasts and gaming. The 4560 is made from a handpicked stereo pair of 4060 Miniature Omnidirectional Microphones.
Getting started Adjusting frame size Two sizes of foam windscreens are supplied with the 4560 to secure the mics’ position in the ears and to offer extra damping of wind noise. Gently place the desired size onto the microphones. Before adjusting the frame size, you need to loosen the braided sleeving covering the cable. Remove the clothing clip, grab the bottom of the sleeving and pull it gently upwards, smoothing it up the entire length of the cable to make it loose at the top.
Mounting on the head Place the microphones gently in your ear canals. They should not be pressed tightly into the ears because this might affect the sound. Adjusting the cable Make sure the earhooks sit comfortably and securely around the ears. To make sure the microphones stay in place, use the clothing clip. This relieves the weight of the cable on the headset. Make a little loop with the cable so there is enough slack to turn your head from side to side.
Connecting the 4560 Specifications Sensitivity, nominal ±3 dB at 1 kHz 20 mV/Pa; -34 dB re. 1 V/Pa, ±1.5 dB pair Equivalent noise level, A-weighted Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A)) Distortion, THD < 1% 126 dB SPL RMS, 129 dB SPL peak Directional pattern Omnidirectional Cartridge type Pre-polarized condenser Effective frequency response 20 Hz - 20 kHz Frequency response Dynamic range 106 dB Max.
Accessories General maintenance Foam windscreens DUA0531B Foam windscreens Adapter for MicroDot to 3-pin XLR DAD6001-BC Optional MMA-A Digital Audio Interface Optional DUA0560 This headset microphone is resistant to high levels of humidity and water. For optimal performance, the microphone capsule should be kept dry. Keep the microphone away from cleaning fluids. Do not use sprays or fluids containing chemicals that could remove static electricity on or close to the microphone.
DPI-4560-M-1 Warranty The 4560 Binaural Headset Microphone is covered by a twoyear limited warranty. Service & repair If you are not satisfied with the characteristics exhibited by this product, please contact your nearest DPA Microphones representative for support. © Copyright 2019 dpam i crop hones.co m/4560 CE marking This product conforms to all relevant directives approved by the European Commission. Product features and specifications are subject to change without notice.
