AirCozy Interactive Smart Pillow User Manual 1
Tips for first-time users 1. AirCozy smart pillow is a product everyone dreams of but never actually had. One of a kind, AirCozy provides the most ergonomic height for healthy sleep whether you sleep on your back or on your side. Using a pillow that is too high for sleeping on your back and too low for sleeping on your side can cause damage to the flexibility of your shoulders, neck, arm and back. 2.
Table of Contents 1. Accessories ................................................................................. 4 2. Setting up & precautions ............................................................ 7 3. Going to sleep .......................................................................... 10 4. AirCozy Semi-wearable device ................................................. 13 5. AirCozy Remote ........................................................................ 15 6.
1. Accessories (refer to diagram of accessories) A. Pillow: Includes (Place A3 memory foam, A4 elastic pad and A5 main unit in A2 inner pillow case first, and then place A2 inner pillow case in A1 washable pillow case): A1. Washable pillow case A2. Inner pillow case A3. Memory foam A4. Elastic pad A5. Main unit (A6 power management box is connected to back of main unit) B. Adaptor C. AirCozy Semi-wearable device D. Rear bumper (※Optional; sold separately) E.
※Product model description: Differences in function AirCozy Premium_N_VA (Main Model) AirCozy Premium_N_VA2 (Serial Model) Responsively and automatically adjusting in height lifting/dropping ✔ ✔ Remote (includes Bluetooth music playback, timer, white noise, and etc.
Diagram of accessories: 6
2. Setting up & precautions 2.1 Insert B adaptor plug into your wall power outlets at home. Connect B adaptor’s circular connector to A6 power management box’s socket, and then place C Semi-wearable device on A6 power management box to charge. 2.2 Place A pillow’s outlet next to the headboard. 2.
2.4 Before using AirCozy for the first time, place C semi-wearable device on A6 power management box to charge. It should be in charging mode all the time when not using it. After it is fully charged, the green indicator light on the semi-wearable device will stop flashing (It is recommended to charge every day). 2.5 Press the circular button on the side of the A6 power management box’s charger to turn on or off the adaptor for the pillow.
2.7 After turning on power of the A pillow, the A pillow will automatically initiate testing of the height adjustment and be ready in standby mode. 2.8 Bluetooth is used for signal transmission between A6 power management box, C semi-wearable device and E remote. Pairing had been done before. 2.9 The A pillow detects sleeping position using the C semi-wearable device worn by the user.
3. Going to sleep 3.1 Press the circular button on the A6 power management box and the button on the C semi-wearable device to turn on power for the A pillow and C semi-wearable device, and get them into standby mode. 3.2 Ways to wear the C semi-wearable device (note: select an option depending on your need; the button on C semi-wearable device must be pointed toward your head) : 3.2.
3.3 Before each use, it is recommended to lie down on your back after wearing the C semi-wearable device correctly. Place the C semi-wearable device against your body and as near the midline of your body as possible for correct sleeping position detection. The button on the C semi-wearable device must be pointing at your head. Press and hold the button for one second; when you hear two beeps, the C semi-wearable device has done the horizontal calibration. 3.
side, the A pillow will automatically lift its height.
4. AirCozy Semi-wearable device 4.1 The C semi-wearable device has a sleeping position detection function. It takes 4~10 seconds for detection to complete before the pillow starts to adjust to an appropriate height. 4.2 Every time you get out of bed, you should press the circular button on A6 power management box to turn power off for the A pillow. You do not need to turn the C semi-wearable device power off instead just place the C semi-wearable device on the A6 power management box to charge. 4.
semi-wearable device can be turned on after approximately 2~4 hours of charging it. 4.3.3 Charging indicator: Red light flashing. 4.4 Functions of C semi-wearable device’s button: 4.4.1 Turn on: Press and hold for 2 seconds until green LED indicator is on, and then blue LED indicator will pulsate slowly. 4.4.2 Turn off: Press and hold for 2 seconds until green LED indicator is on, and release the button. 4.4.3 Horizontal Calibration: Refer to 3.3.
5. AirCozy Remote (not included in AirCozy Classic) ※AirCozy Premium※ 5.1 Multifunction button: E1 Power button: Press and hold for 2 seconds to turn on or off the remote. 5.1.1 On/off mode: Press and hold for 2 seconds. When blue LED indicator is on, release hold to turn power on (note: if you do not release your hold when blue LED indicator is on, it will enter the pairing mode). 5.1.
5.2.1 E2 Mobile phone Bluetooth music button: (this function is not available for AirCozy Classic) - Start Bluetooth function using E remote (note: press E2 mobile phone Bluetooth music button); - Search “AirCozy Music” in mobile phone for Bluetooth connection; - Start playing your favorite music. 5.2.2 E3 Timer button: Press timer cycle setting; choose from 30 minutes, 1 hour, 2 hours or 3 hours. 5.2.
6. Resetting pairing for Semi-wearable device & remote 6.1 Bluetooth pairing has been done before; reconnecting is automatic after changing battery or turning on and off. 6.2 Resetting pairing for semi-wearable device and remote: (note: Only one device can be paired each time; the same steps must be repeated to pair the next device): 6.2.1 First of all, to use a SIM card ejector pin or similar sharp object to press the small hole in the A6 power management box.
7. Height adjustment for side/ back sleeping position 7.1 You may set your preferred height for side sleeping position according to the firmness of your mattress. Take out the A5 main unit and adjustment handle tool as the following diagram, then turn the two “side-sleeping height adjustment knobs” behind the lower part of the unit to fine tune the pillow’s height for side sleeping.
8. Disassembling & cleaning 8.1 You may unzip the A1 washable pillow case and remove it to clean it. 8.2 It is recommended to vacuum-clean the A2 inner pillow case and A3 memory foam, or air dry them in a shady place.
9. Troubleshooting ※When it is not functioning: 9.1 Check if power cable is plugged properly and all switches are on. 9.2 Check if the pillow will automatically test height adjustment (lifting and dropping the height) at start-up. 9.3 Check if C semi-wearable device is fully charged. 9.4 Check if C semi-wearable device’s power is on. 9.5 If the pillow is not working, reset and pair the semi-wearable device and remote (note: refer to point 6). 9.
10. Caution! 10.1 The C semi-wearable device is costly, and contains electronic parts and battery. Remember to remove the semi-wearable device when washing the long/short pajamas pants. Do not soak in water or drop it. 10.2 Do not stake, do not soak, and do not toss the pillow’s main unit. Please handle the pillow’s main unit with care as it’s fragile. 10.3 Do not voluntarily pull the cable/wires of the A6 power management. 10.4 This product has one-year warranty.
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual. Company name: DozzyCozy Technology Co., Ltd. Address: Unit 15-2, 15th Floor, No. 11, Section 2, Huánnán Road, Pingjhen District, Taoyuan City, Taiwan, R.O.