OW T EL Operating Manual » The number in the Phone Book is connected. All ¢ Connecting... 1001234 {Figure » Press the button of the phone Yui © number stored in any of Address [10] ~ [98], and then press the “1 [SND/RDL] button. Speed Dialing Memory 12 (Figure > The speaker phone operates automatically and the phone number All stored in the Phone Book is connected. Connecting...
BOW T E 1 Operating Manual 3.2 Answering Calls 3.2.1 On-Hook State » When a call is being received, the phone rings. All » If you subscribe a caller ID service, Ringing... the calling party information will be displayed in the third line on the screen. And the information will be 1001234 displayed in the fourth line on the . screen if the calling party number is 03:DOWTEL stored in your Phone Book.
OW T El Operating Manual 3.2.2 Off-Hook State » If a call is being received when the Y. | Jan atl & handset is picked up or the speaker is on, click the Hook Switch or press [SPK] button, and then the call is Ringing...
OWT El Operating Manual 3.3 Disconnecting Calls 3.3.1 Using the Handset » Hang up the handset when the Y, | call is finished. all » If the calling party hang up the Nov 11 (Sun) phone before you do that, the waning-tone sound is supplied 11:11 am through the earpiece until you hang up the phone. {Figure 3.3.1) 3.3.2 Using the Speaker Phone » Press the [SPK] button when the call is finished.
DOW 1 E 1 Operating Manual 3.4 Transfer be! n Handset taker Phone 3.4.1 Transfer to Speaker Phone in Off-Hook State » When you press the [SPK] button under the Off-Hook state, the [SPK] All ® lamp is fumed on and voice is out through the speaker. 00:01 1001234 (Figure 3.4.1) 3.4.2 Transfer to Handset in Speaker ON State » if you pick up the handset when ~~ the [SPK] lamp is on, the [SPK] lamp Yalta is turned off and voice is out through the earpiece. 00:01 1001234 (Figure 3.4.
NOWT El Operating Manual 3.5 Volume Control You can adjust the volume from low to high in 5 different levels. 3.5.1 Keypad Tone Control » The Keypad Tone can be Y, | changed by pressing [A] or [V¥] ull button when the handset is on the phone and the [SPK] mutton is oft. | Keypad Volume Te ee 0 (Figure 3.5.1} 3.5.2 Ear Volume Control » The Ear Volume can be Yul &@ changed by pressing button after you pick up the handset.
BOWEL Operating Manual 3.5.4 Ringer Volume Control » The Ringer Volume can be changed by pressing [a] or [v] All button when the phone is ringing.
WOW TEL Operating Manual 3.6 Hot Line This function is useful when you want to make an automatic call to the designated number without dialing or pressing the [SND/RDL] button. Hot Line operates in 2 modes. » Timed Hot Line : This will make a call to the designated number without dialing or pressing the [SND/RDL] button within the Sending Time{4 ~ 8 seconds) after you pick up the handset.
NOWT EL Operating Manual 3.7 Emergency Call Hold This function is used in the emergency situation and once the call is connected, it won't be disconnected as long as the receiver does not hang up. You can store up to three emergency call hold numbers at address the Phone Book. (Reference 4.4 Phone Book Function) You can set the ON/OFF of the Emergency Call Hold function using the Menu Mode. (Reference 5.4.
NOWT EL Operating Manual 3.8 Do Not Disturb (DND) When you don't want to answer the incoming call, use this function, [Setting ON] p Press the [TRANSMUTE] button Fry when the handset is on the phone All OM and the [SPK] lamp is off, Nov 11 (Sun) » The phone doesn’t answer to the incoming call and the DND icon is 11:11 am flashing simultaneously. (Figure [Setting OFF] » Press the [TRANSMUTE] button when the handset is on the phone All and the [SPK] lamp is off.
BOW TEL Operating Manual 3.9 Voice Mute 3.9.1 Functions During the conversation, if you don’t want to transmit your voice or sound to the called party, use this function. You can use this function the following case. . When you input the memo in the phone Book using the keypad. . When you need to control the Menu to change the Voice Privacy function during the conversation. . When you use the Memo Storing function during the conversation. 3.9.
Dg INTEL Operating Manual » When the setting is done, the Voice Mute Icon is appeared on All [ 4) the screen and any voice or sound il will not be transmitted fo the other 00:36 party. : p If you want to release this function, select the muteness in figure 3.9.2-2 and press the [STORE] button, {Figure This function is valid In each call. Even though you finished call with [Mute] status, thé phone is returned to [Mute] status Automatically.
bg WAIL Operating Manual 4. Additional Functions 4.1 Short Message Service (SMS) You can transmit/receive the simple text or voice message using this phone. All D4 All [= MESSAGE! VOICE MAIL 4/10 11:45am 4/10 11:45am (Figure {Figure » When the phone received the text message, the sign like the figure 4.1-1 is appeared on the screen with the STOICISMS notification tone. » To retrieve the text message, @ Press the [CLR] button to return to the idle-stats.
DOWNY EL Operating Manual » To send the text message. @ Press the [MSG/VAS] button in the idle-state, and then press the [MENU] button. @ Press the [1] button to input the receiver's name, and then press the [STORE] button. @ Press the [2] button again to input the message, and then press the [STORE] button. @ Press the [3] button to input the calling party's name, and then press the [STORE] button. &) Press the [4] button, and then the text message is transmitted to the called party.
DOWNY EL Operating Manual 4.2 Alarm Reminder This phone has Time Alarm function. You can set the alarm time under the 12-hour system. ~The phone has a Two-type mode (Onetime Mode and an Always Mode). The Alarm time can be set and edit under the 12-hour system. . Onetime Mode; The alarm rings at the specified time, and then the setting mode is released automatically. But the stored time will be remained. . Always Mode; The alarm rings at the specified time every day until the setting value is released.
BOWEL Operating Manual 4.3 Voice Privacy (System Dependent) 4.3.1 On-hook State p Press in order and Select mode or mode by using [a] or [vw] button, and then press the [STORE] button. 4.3.2 During a Conversation All (28 4.3.1) » Press [MENU] button during a conversation and press <1>, » Select mode or mode by using [a] or [w] button, and then press the [STORE] button. Yul @ 1. Voice Privacy 2. Memo Dialing {18 4.3.2) 4.
DOT EL Operating Manual 4.5 Using the Phone Book 4.5.1 Store the Phone Number in idle-state » When the state of the phone is in idle-state; All Nov 11 (Sun) 11:11 am {Figure » Enter the phone number using the dial button, and then press the [STORE] button. all 1001234 {Figure » The figure 4.5.1-3 is displayed on the screen. All » Type the name using the dial << > button, and then press the [STORE] Name Reg DOWEL _ button.
BOW TEL Operating Manual » The figure 4.5.14 is displayed screen Ail » Press the memory location << Address Reg>> number you want to store the phone number, and then press the a9 [STORE] button. User Define [227] » If you just press the [STORE] Auto [03] button, the number is stored at memory location number [03]. {Figure 4.5.14) 4.5.2 Storing the Caller/Receiver Number When you make a call or answer to the incoming call, the number of caller and receiver is displayed on the LCD screen.
FONT E L Operating Manual {Note] The incoming call’s number is displayed in the left side on the screen and the making call’s number is displayed in the right side on the screen to separate between the incoming call and making call. [Making Call] » The number of called party is 3 displayed on the screen when you All & dial the number, 00:01 1001234 (Figure » When you finished a call, the number is shown for 3 seconds on f ill the screen. il » At this time, press the [STORE] button. {Reference 4.5.
_BOWEL Operating Manual 4.5.3 Storing the Memo during a conversation During a conversation, you can enter the number using the dial button and store the number in the Phone Book or make a call after the call is finished. » Press the [MENU] button during a conversation. » Press the [2] button, and then enter the phone number during a conversation using keypad. » Even though you press the dial button, the keypad tone is not transmitted and the number is just displayed on the screen.
DOWEL Operating Manual 4.5.4 Search the Stored Number p When the phone is in idle-state, 454-1) is All the screen(Figure displayed if you press the [RCL] button, 2.Name Search 3.Last 10 Dialed 1.Address Search (Figure » When you press the [1] button, the screen(Figure 4.54.2) is All displayed. » Enter the memory location number using the dial button.
_BOWEL » If you press the button in the figure you can search other number. » Select the address you want, and then press the [STORE] bunion. The phone displays the number of the stored address. » When you pick up the phone or press the [SND/RDL] button, the phone make a call the selected number. » if you press the [2] button in the figure the screen{figure is displayed on the screen. » Enter the name you want to search using the dial button, and then press the [STORE] button.
DOWEL Operating Manual » If you press the [3] button in the figure 454-1, the screen(figure Y, I 4.5.47) is displayed. ill » Select the number using the > 01:0172890085 [DOWNPOUR] button, and then press . the [STORE] utter, The "phone 02:0166121601 displays the number of the stored number. 03:9176203899 p Press the [SND/RDL] button or pick up the phone, and then the pane will make a call. {Figure 4.5.47} 4.5.
BOWEL Operating Manual » Select the [1] button in the figure and then you can change All the number using the [CLR] and dial I button. 1001234 (Figure 4.5.53) p After changing the number in the Y, il | figure press the [STORE] button.
OWT EL Operating Manual » When the address that you enter in the figure 4.554 is already All existed on the phone book, the if phone will ask you to replace the . address or not. < Overwrite? > p If you select the “Yes”, the 1. address will be replaced. you select the “No”, the original number will remain at that address and you should store new address as shown on the figure (Figure 4.5.55) » When all procedure is finished, the stored address and name will be All displayed on the screen.