DOVEN LLC DVD Series – User’s Manual Linear Measurement
DOVEN LLC DVD Series – User’s Manual ã Doven LLC 2408 Timberloch Pl • Suite A5 The Woodlands, TX 77380 USA Revision 1.
Table of Contents Introduction ................................................................................ 1 Installation .................................................................................. 1 Repairs ....................................................................................... 1 Antenna Considerations ............................................................. 2 Power Supply .............................................................................
G E N E R A L C O N S I D E R A T I O N S 1 Chapter Introduction D oven DVD Series devices are purely for distance measurement assistance systems. They therefore do not satisfy the safety class 3 requirements and must not be used as standalone systems in safety-critical applications, such as anti-collision. Doven devices are designed and built with close collaboration between the hardware and software teams to deliver products that are both user-friendly and have plenty of functionality.
Antenna Considerations This unit has been designed to be operated with the supplied antenna. Utilization of any other antenna is strictly prohibited. The use of any antenna other than the one supplied by Doven is explicitly forbidden. Only Doven is authorized to replace a defective or non-working antenna. Power Supply Before connecting power to this unit, please verify that the following conditions are satisfied: a.
W A R R A N T Y A N D C E R T I F I C A T I O N S 2 Chapter Mounting Instructions • This device should be installed on a mobile device only. • No device will be fixed to the ground. • The devices will be allowed to work indoors and outdoors.
W A R R A N T Y A N D C E R T I F I C A T I O N S 3 Chapter 1D Linear Measurement The 1D linear measurement consists of a pair of Doven devices used only to measure the distance between them and eventually trigger warning and collision signals. Direct line of sight is required between both devices. One device should be set as Anchor whereas the second unit should be set up as Beacon.
W A R R A N T Y A N D C E R T I F I C A T I O N S 4 Chapter Warranty Doven is a customer service-oriented company focusing on providing the best products for our customers and integrators. One of our greatest strengths are the pre-sales engineering and the after sales support. If you experience any issue with one of our products you should contact our customer support sending an email to the following address: support@dovenllc.
W A R R A N T Y A N D C E R T I F I C A T I O N S This device must only be sold by Doven LLC or any authorized representative. In all cases, sales are done to industrial/commercial companies. Sales to end the general public are forbidden and not applicable for this type of device. All installation, repair and servicing work must be carried out by qualified and trained professionals. Only Doven can replace any malfunctioning antenna. Antenna Use • This device is sold with its own antenna.