REV. 1.
Contents Before the use Before the use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Monitor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Model name & function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Use of product How to Connect & Use . . . . . . . . .
Before the use Before the use Caution for safety ※ Warning : It displays the cases where a mistaken handling may cause an infliction of death or serious injury to a person. It displays the cases where a mistaken handling may cause an infliction of Caution : ※ physical injury to a person or property damage to a person. ※ For environment, do not dispose this product to the waste can and make sure to collect in separate disposal.
Before the use (Reference : This image may differ depending on each case for reference only.) Make sure to read the contents before use. Do not disassemble without authorization and inquire A/S Center for any problem. - When contacting to the inside, it may cause fire or electric shock. When there is any strange sound or smoke and odor, pull it off from the cab le immediately. - It may cause fire or electric shock.
Before the use Product Configuration DS-70 & DS-90U DS SSeries Version 1.
Before the use Monitor Assembly Stand assembly-type Fixed handle Stand USB MONITOR 5
Before the use Model name & function LEFT TOP FRONT RIGHT BOTTOM 1 3 4 3 2 REAR Stand fixing hole 5Pin Min USB Port Power button Bir + , - USB MONITOR 6
Use of product How to Connect & Use Connect USB Monitor ■ Use the USB cable to connect the monitor and PC. * The USB cable is used with the cable provided at the time of purchase. or ■ Terminal A (5Pin Min USB) connects the monitor and two terminal B (Serial A USB) to PC. B A Minimal requirement of system CPU Intel Pentium/Celeron,AMD/K6/Athlon/Duton 1.2Ghz RAM 512MB RAM or more USB Port 2 or more of USB2.0 (It is recommended to use two with the difference of some PC spec.
Use of product Driver Installation Driver installation ■ When the PC booting is completed, begin installation after connecting the USB cable. 1. You can see the right screen when you insert CD into CD-ROM. (1) Monitor Driver Double click to install USB monitor driver. * Please check your model name. (2) Monitor & Touch Installation Double click to install USB monitor & touch driver. * Please check your model number. (3) User's manual Double click to see the user's manual.
Use of product 4. After completely installed, it is recommended to end the PC and re-start. * When a problem arises, it is recommended to re-booting of the PC. 5. After completing the installation, the icon in the monitor shape is generated on the tray on lower right side of the monitor and the USB monitor information installed is displayed. 6. When completing the installation, setting has to be made as follows to use the monitor.
Use of product USB Monitor Display Information setting 1. When the USB monitor and PC are connected with the USB cable and the driver installation is completed, the system tray on the right side of the screen generates the icon of the monitor shape. 2. Click the monitor-shaped icon to press the right mouse button to display the set menu. (1) Resolution (R) This is to display the current USB monitor resolution. (However, this product 7" 800*480, 8.9" is the fixed resolution of 1024*600.
Use of product (7) Turning off (O) The USB monitor screen is turned OFF. Under the Off condition, it still maintains the turning off condition while the PC is turned off that select "E" or "M" to have the screen back on the USB monitor. (8) Advanced class (A) It moves to the display set mode. Touch Screen Setting(For DS-10UT) 1. USB Controller icon appears when touch screen driver is ready. 2. Check "Enable Multiple Monitors" and double click the monitor setting screen. 3.
Use of product 4. Click "Apply" when outline of display screen is changed to white line. 5. Click "Yes" 6. Click "Yes" ■ Calibration Setting 1.
Use of product 2. Hold pressing flickering point until it to finish flickering and continue to enter next calibrations. (Enter 4 points) 3. Calibration setting is completed After entering 4 points. * Please reboot PC when driver installation is completed. USB Monitor Restrictions ■ Support spec ● This monitor is the USB monitor recognized as the USB device that the DOS screen shown in the PC booting will not be displayed.
User's Guide Symptoms for possible problems and responses ■ When there is any problem, make sure to check the followings first. Q : The USB monitor screen is not displayed. A : (1) Check if the USB cable is correctly linked and if the USB Driver is installed. (2) Check if the blue LED color on the USB monitor is come on and if the power button is turned Off. (3) Check if the tray monitor icon on the lower side of the monitor has 'Off'. (4) The USB monitor reads the general USB device on the PC.
User's Guide Q : When you use Skype video chat with Window XP OS, there may be flicker or distortion in screen. A : The use of DirectX function causes this symptom. Make sure not to use it on the graphic card setting because there is no option to disable this function on SKYPE. OS: Windows XP (1) On the desktop, right-click to display 'Display Properties' window. (2) Click 'Settings' tab and click Advanced (V). (3) Click 'Troubleshoot' tap.
User's Guide OS:Windows Vista (1) Select program 'Cumstomize colors' from the control panel OS: Windows Vista Home premium, Business, Ultimate (1) Click "Window Aero" (2) Click "Apply" OS: Windows Vista Home basic (1) Click "Windows Vista Standard " (2) Click "Apply" USB MONITOR 16
User's Guide Specification DS-10UT DS-10U (Resistive Touch) 10.1” TFT LCD Panel(LED Backlight System) WSVGA (1024 x 600 ) 262K Colors 500:1 45/45/15/35 16ms 13.85 222.78 153.06 247.66 : 0.61Kg 18.