Data Sheet

2014 Dotworkz, Inc www.dotworkz.com
D2 PoE++ Heater Blower, 80W*
Product Number: D2-HB-POE-HP
The Dotworkz D2-HB-POE-HP is an engineered outdoor housing system
that is designed to allow most indoor PTZ & mini-dome camera models
to allow for quick installation via Ultra High Powered PoE++ (80W)
housing solution into a complete rugged outdoor system solution.
Up to 80W or equivalent VA of Internal power available to create a plug
and play POD solution to power camera and accessories in a all in one
housing, *when used with a compatible 100 Watt PoE Inserter Midspan.
Virtually Indestructible housing solution for the a wide array of harsh
environments. IP68 NEMA 4X ingress protection of housing, provides the
highest levels of protection from water, dust, marine, and vandal abuse.
· Designed to Simplify Powering of Housing using one Ethernet Cable for Power and
Data, via Ultra High Power PoE (when using a 100W injector provides for max load)
· Internal Power output for 12V DC @ 25W; or 24V AC up to 60VA+ available for
camera & Accessory powering (maximum system rated to 80W, including Heater)
· External RJ-45 Quick Connect (IP67 connector) for quick installation
· Integrated Thermostatically controlled direct Lens Heater for dome bubble
· Integrated 10 CFM Blower fan
· Enough 12 VDC or 24 VAC to Power most PTZ’s, with room & power for camera
and other accessories to create a Ethernet PoE++ powered POD
· Vandal Tough Housing protection
· External IP rated Ethernet Quick Connect Integrated
· Easy Access / Easy Install of customer supplied camera
Easily Integrate camera and housing into a wide range of outdoor
applications via PoE Power, to allow camera and housing to be powered by
a single Cat 5e/ Cat6 Ethernet cable.
Extra heavy duty Dotworkz Housing is wall mount ready. The EZ Lock Pole &
Speedy mount (# BR-MPM1) is available & sold separately for additional
mounting options, as well as corner, parapet, and a whole line of other
specialty mount brackets are available, sold separately, for virtually any
mounting needs.
Good for commercial, Industrial, remote, coastal, and wide range of
environmentally challenging installation.
· Single External Ethernet Cable powering housing solution via PoE using 802.3-at
compliant power negotiation for PoE++ Power injectors
· Vandal Tough casing designed to protect valuable electronics from environment,
vandalism, and theft
· Housing meets IP68 rating: Airtight and sealed against outside air, dust, insects,
water / salt fog and other conditions
· Internal mounting space for most indoor PTZ or dome cameras; nearly all makes
and models, plus a number of accessories, including Micro-NVR’s, Switches, & Hubs
Product Number
Product Weight
Product Dimensions
D2-HB-POE-HP
8.5 lbs
15.0”l x 11.7”w x 13.4”h
Shipping Weight
Shipping Dimensions
13 lbs
17”l x 13”w x 16”h
*Product specifications are subject to change without notice
Dotworkz Systems Inc.
3688 Midway Drive
San Diego, CA 92110
Sales Inquiries
[e-mail]
Toll Free: 866-575-4689
Phone: [phone]
Fax: [phone]
Combines the New IP 68 seal protection level with the ease of PoE installation