DOT MINI DM-01 Basic Manual Page 1 / 27
[Table of Contents] I. [Introduction] – [Page3] 1.What is Dot Mini? – [Page3] 2. Name and Part Functions – [Page3] II. [Power on/off and Battery] – [Page.6] 1. Powering on/off– [Page.6] 2. Standby mode– [Page.6] 3. Battery– [Page.7] III. [Starting the Dot Mini] – [Page.8] 1. Dot book– [Page.8] 2. Brl Classroom– [Page.10] 3. Music player– [Page.10] 4. Recorder– [Page.11] 5. Settings– [Page.13] IV. [Safety and Handling Precautions] – [Page.15] V. [Components and Specifications] – [Page.21] 1.
I. [Introduction] 1. What is Dot Mini? Dot Mini is a braille device released by Dot Incorporation that you can use to read various forms of files including text documents in braille and play media files. You can freely utilize external files using a USB, SD card, etc., and efficiently manage storage space in the Dot Mini. The Dot Mini contains a built-in braille transcription engine.
1) Power key The power key is located at the top right side of the Dot Mini. It is a small, round button. 2) LED LED is located in the upper left part of the front side to indicate power and charging statuses. When Dot Mini is being charged, a red light will be shown. When charging is complete, a green light will be shown. When the Dot Mini is being used, a blue light will be shown.
settings or the playback position of audio files. The enter key is used to select a menu or save settings. 4) Back key The back key is located to the right of the direction keys. When you make a short press with the back key, it will allow you to go to the previous menu or cancel what's running. When you hold the key to make a long press, it will take you back to the Home menu. 5) Shift key and control key The shift key and control key are located to the lower right of the direction keys.
- USB-C Port: The USB-C port is the topmost port located on the left side of the Dot Mini. It is used to share data or charge the Dot Mini using PC and USB cables. - USB-A port: The USB-A port is the second port, located directly under the USB-C port. It is used to connect the QWERTY keyboard, etc. - Micro HDMI port: The Micro HDMI port is the bottommost port, located directly under the USBA port. This port is only used for A/S purposes, so it is not supported for the user.
2) Powering off Press and hold the power key for 3 seconds to power the Dot Mini off. The braille pins will go down, and an alarm will ring along with a vibration. Your device is now turned off. 2. Standby Mode The Dot Mini will enter standby mode when it is not in use for a certain period of time, to reduce power consumption. The device will vibrate twice to indicate the start of standby mode.
connected and the device has 51% battery remaining, the braille cells will read [Battery 51%]. If the charging cable is connected and the device has 51% battery remaining, the braille cells will read [Charging 51%]. It is recommended that you charge the device when your battery level is below 10% to prevent the device from being discharged. III. [Starting the Dot Mini] 1. Dot Book You can edit or read a book by connecting the Dot Mini to a PC or external storage device.
You can mark words or sentences with the underlining or highlighting functions supported by the Dot Book. Enter the highlight menu by pressing the control key and enter key simultaneously. To highlight the selected sentence, press the enter key. To view highlighted sentences, enter the highlight menu again, press the down key to find ‘Open Highlight’, and press ‘Enter’ to display the list of saved highlights. You can move within the list using the up and down keys.
press the shift key and an up or down key to move 30 paragraphs at a time. Similarly, simultaneously press and hold the shift and up or down key to move 50 paragraphs at a time. 2. Brl Classroom The Brl Classroom serves an educational purpose and can be used to learn braille history, uncontracted grade 1 English braille, contracted grade 2 English braille, and Korean braille. The ‘Dot-to-Dot’ menu inside the Brl Classroom trains your fingers to recognize the dots and their positions.
01:02:34 in braille on the braille display. If the current playback location is 5 minutes and 9 seconds, it will appear as 00:05:09 in braille on the braille display. - Check current playback location: to show the current playback location on the braille display, press the next key. - Check the total play length: to show the total play length on the braille display, press the next key twice, or go to the current play position and press the next key once.
device. 1) Start recording In the ‘Start recording’ menu, press ‘Enter’ to start recording. While recording, press the next key to show the current length in the braille display for three seconds. To pause recording, press ‘Enter’ to pause recording. The relevant menu will be shown. Once the menu is displayed, press the up or down key to select Resume, Listen, Save, or Delete, and press the enter key once more to execute that action.
You can set a storage location for recorded files. Select the preferred storage device using the left or right keys and press ‘Enter’ to save the recorded file in that device. 5. Settings 1-1) Wireless Communications-Bluetooth The Bluetooth function enables a nearby mobile or earphone device to be connected to the Dot Mini. You can sync your Dot Mini with a mobile application via Bluetooth to download book files.
4) Standby Mode You can choose to enable or disable standby mode. Use the left and right keys to choose your preferred option, then press the enter key to save this setting. Disabling standby mode will not switch the Dot Mini to standby mode even after the saved waiting time. You can select the waiting time to 5 minutes, 10 minutes, 20 minutes, or 30 minutes. Use the up and down keys to choose your preferred waiting time, then press the enter key to save this setting.
7) Manual For your convenience, we've included the Dot Mini Manual. The manual will help you find information and instructions that you will need while using the Dot Mini. The manual is to be updated along with each Dot Mini update. 8) Storage This menu helps you check available storage space to help you manage storage space efficiently. You can view storage currently in use and available storage space. When you enter the Storage menu, you will read and hear [Entire size].
IV. [Safety and Handling Precautions] The contents of this manual are based on the default settings of the device. The contents may differ from the actual device experience depending on the software version, firmware version, model specifications, and user’s customized settings. Do not use the product for other purposes. Beware that the product may be damaged if a shock is applied. - Keep the Dot Mini dry. The device may malfunction when used in humid or wet environments.
data, as it may be lost or deleted during repair. The manufacturer is not responsible for the loss of data. In addition, the Micro HDMI port is only used for A/S purposes, so it is not supported for the user. Please follow the safety precautions below: 1. [Lightning Hazards] When thunder or lightning is severe, it is advised not use the device. Disconnect the charger from its power source. A lightning strike may cause serious injury or fire. 2.
4. [Power Precautions] Insert the charger USB cable correctly and make sure it is firmly connected. Do not bend, pull, twist, heat, or cut the charging cable. Doing so may damage the cable and cause fire or electric shock. Disconnect the charger when not in use. There may be risks of electric shock when using the Dot Mini while charging. When removing the adaptor, hold the part of the adaptor and carefully separate the adaptor from the device.
7. [Metal Precautions] Do not place charging terminals close to exposed metal, such as necklaces, keys, coins, nails, watches, etc. If metal objects are shorted to the charging terminal, there may be risk of explosion and/or irreparable damage to the device. 8. [Children/Pets Precaution] Store the device, charger, and parts away from children and pets. The device may cause electric shock, or cause exposure to electromagnetic waves when damaged or in contact with saliva.
11. [Skin Damage Precaution] When using the device for a long time, the surface temperature of the device may rise. It is not unusual for the device to do this, and the device should still operate properly. Stop using the device immediately if it causes skin spots, pigmentation, or burns. If the device causes any allergic reaction, stop using the device immediately and consult a doctor. 12. [Storage Precaution] When not in use, disconnect the charging cable from the outlet and store it in a safe place.
contact the official service center. 14. [Shocking Precaution] Exerting strong force on the product or placing it under heavy objects will shock the product. Store the product in a safe place to avoid any impact when it is not in use. V. Components and Specifications 1. Introduction of components - Dot Mini Body - Adaptor for Charging - USB cable for Charging - 32 GB SD card ※ The SD card will only be provided for first-time purchases. You must then purchase SD card additionally. Dot Incorp.
Material Dimension Weight PC (Polycarbonate) Dot Mini Adaptor W165 x H18 x D110 (mm) W84 x H43 X D110 (mm) Dot Mini Adaptor 283g 47g Actuator 1st Generation 16cell(6pin/1cell) Cell Array 1 Line/16 cell Processor NXP4330(32-bit, ARM Coretex-A9 Quad core CPU Memory DDR3L - 1Gbyte Storage Wired Comm Wireless Network Antenna Audio OS Keys eMMC (Flash & Memory Controller) 8Gbyte External : SD x 1 (max : 32Gbyte) USB Type A USB Type C WIFI : 802.11a/b/g/n BlueTooth : 4.
with the product, please contact the place where you purchased the product or Dot Homepage. (Website: www.dotincorp.com) If you have any other questions, please contact us through any of the methods below: E-mail: support@dotincorp.com Customer Telephone and Counseling Center Dot Mate: +82-1811-3324 Homepage: www.dotincorp.com VI.
FCC class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
antenna or transmitter. All rights reserved. This manual may not be reproduced in any form. Even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences.
[FCC and CE compliance Statement] These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on.
Page 27 / 27
